HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 deployment guide (AG421-96001, March 2007)

HP STORAGEWORKS ENTERPRISE FILE SERVICES WAN ACCELERATOR DEPLOYMENT GUIDE 95
9 - PROXY FILE SERVICE
D
EPLOYMENTS
CHAPTER 9 Proxy File Service Deployments
In This Chapter This chapter describes Proxy File Service (PFS) and provides the basic steps for
configuring it. This chapter includes the following sections:
 “Introduction to PFS,” next
 “Configuring PFS Using the Management Console” on page 101
This chapter assumes you are familiar with the installation and configuration process
for the HP EFS WAN Accelerator. For detailed information, see the HP StorageWorks
Enterprise File Services WAN Accelerator Installation and Configuration Guide.
This chapter also assumes you are familiar with the HP EFS WAN Accelerator
Management Console (Management Console). For detailed information about the
Management Console and how to use it, see the HP Enterprise File Services WAN
Accelerator Management Console User Guide.
NOTE: PFS is not supported on the Model 510.
Introduction to PFS
This section describes PFS and how it works. It includes the following sections:
 “Upgrading from V2.x to V3.x,” next
 “PFS Terms” on page 97
 “PFS Operating Modes” on page 97
 “Domain Mode” on page 99
 “Local Workgroup Mode” on page 100
 “When to Use PFS” on page 100