HP StorageWorks Enterprise File Services WAN Accelerator 3.0.
Legal and notice information © Copyright 2006–2007 Hewlett-Packard Development Company, L.P. © Copyright 2003–2007 Riverbed Technology, Inc. Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
Introduction CONTENTS Contents ........................................................................................................... 7 About This Guide.................................................................................. Types of Users ................................................................................ Organization of This Guide ............................................................ Document Conventions ................................................................
Configuring MS-SQL Protocol Options....................................... 36 Enabling the NFS-Application Streamlining................................ 38 Modifying NFS Server Settings ................................................... 39 Enabling HSTCP Protocol Options .............................................. 42 Enabling Connection Pooling....................................................... 44 Enabling Transparent Prepopulation ............................................
Setting the Date and Time .......................................................... 125 Setting NTP Servers ................................................................... 126 Managing Licenses ........................................................................... 137 Updating Your Licenses ............................................................. 137 Viewing Scheduled Jobs ................................................................... 138 Viewing Scheduled Jobs..........................
Creating Memory Paging Reports .............................................. 190 Viewing Proxy File Service Reports................................................. 192 Viewing PFS Share Status Reports............................................. 192 Viewing PFS Statistics ............................................................... 193 Exporting Performance Statistics Reports ........................................ 196 Exporting Performance Statistics ...............................................
INTRODUCTION Introduction In This Introduction Welcome to the HP EFS WAN Accelerator Management Console User Guide. Read this introduction for an overview of the information provided in this guide and for an understanding of the documentation conventions used throughout.
Chapter 3, “Creating HP EFS WAN Accelerator Reports and Logs,” describes how to create and view HP EFS WAN Accelerator reports and logs. Appendix A, “HP EFS WAN Accelerator Ports,” provides a list of commonly optimized ports, excluded ports, default ports, and interactive and secure ports that are automatically forwarded by the HP EFS WAN Accelerator.
Ethernet Network Compatibility The HP EFS WAN Accelerator supports the following types of Ethernet networks: Ethernet Logical Link Control (LLC) (IEEE 802.2 - 2002) Fast Ethernet 100 Base-TX (IEEE 802.3 - 2002) Gigabit Ethernet over Copper 1000 Base-T and Fiber 1000 Base-SX (LC connector) (IEEE 802.3 - 2002) The Primary port in the HP EFS WAN Accelerator is 10 Base-T/100, Base-TX/1000, and Base-T/SX Mbps (IEEE 802.3 -2002).
Additional Resources This section describes the following resources that supplement the information in this guide: Related HP Documentation Online Documentation 10 “Related HP Documentation” on page 10 “Online Documentation” on page 10 “Related Reading” on page 11 You can access the complete document set for the HP EFS WAN Accelerator from the HP StorageWorks EFS WAN Accelerator Documentation Set CD-ROM: HP StorageWorks Enterprise File Services WAN Accelerator Installation and Configurati
Related Reading To learn more about network storage systems and network administration, consult the following books: Microsoft Windows 2000 Server Administrator’s Companion by Charlie Russell and Sharon Crawford (Microsoft Press, 2000) Common Internet File System (CIFS) Technical Reference by the Storage Networking Industry Association (Storage Networking Industry Association, 2002) TCP/IP Illustrated, Volume I, The Protocols by W. R.
INTRODUCTION
Overview of the HP EFS WAN Accelerator Management Console In This Chapter This chapter introduces the Management Console. This chapter includes the following sections: “Connecting to the Management Console,” next “Navigating in the Management Console” on page 16 NOTE: If you prefer, you can use the HP EFS WAN Accelerator Command Line Interface (CLI) to perform configuring and monitoring tasks.
To connect to the Management Console 1. Enter the URL for the Management Console in the location box of your Web browser: protocol://host.domain protocol is http or https. Hypertext Transport Protocol Secure (HTTPS) uses the Secure Sockets Layer (SSL) protocol to ensure a secure environment. If you use HTTPS to connect, you are prompted to inspect and verify the SSL key. host is the host name you assigned to the HP EFS WAN Accelerator during initial configuration.
The Home: Welcome Page The Management Console Home: Welcome page includes the current status of the HP EFS WAN Accelerator and the Traffic Overview report. Figure 1-2.
The following table describes the information included in the Home: Welcome page. Field Description Status Bar The status bar appears on every page of the Management Console and displays the current status of the system. To check the status of the system, click the link in the status bar. For detailed information about system alarms, see “Viewing Alarm Status Reports” on page 185. The HP EFS WAN Accelerator can be in one of the following states: • Healthy. All systems are functioning properly.
The following figure illustrates the tabs and menus that appear on each page of the Management Console. Figure 1-3. Management Console, The Home: Welcome Page Click Logout to log out of the system. Click the Printer icon to print a page or report. Click the Book icon to display online help. Menus for tasks you can perform from tabbed pages appear on the left of the Console. TIP: To revisit the Home: Welcome page, click Home in the navigation bar.
Tabbed Pages and Menus You click the hyperlinked tabs to display tools and reports to help you configure and manage your HP EFS WAN Accelerator. The following table summarizes the purpose of each tabbed page. Tab Purpose Home Displays the current status of your system and provides links to connected appliances, a traffic summary, alarms, system logs, and technical support information. Setup Configure and administer the HP EFS WAN Accelerator.
Displaying Online Help • Click the Book icon in the upper right-side of the page. The help for the page appears in a new browser window. The Help tab provides you with the following links to help you administer and manage the HP EFS WAN Accelerator: Logging Out To log out of the Management Console Technical Support. Displays HP Technical Support contact information. Online Help. Displays the online help table of contents.
OVERVIEW OF THE HP EFS WAN ACCELERATOR MANAGEMENT CONSOLE
In This Chapter Configuring the HP EFS WAN Accelerator This chapter describes how to configure and manage the HP EFS WAN Accelerator using the Management Console.
Setting Optimization Services This section describes how to set optimization service parameters for the HP EFS WAN Accelerator.
For detailed information about in-path and out-of-path deployments, see the HP StorageWorks Enterprise File Services WAN Accelerator Deployment Guide. To enable in-path or out-of-path support 1. Click the Setup tab to display the Optimization Service - General Settings page. Figure 2-1.
2. Use the controls to complete the configuration, as described in the following table. Control Description In-Path Enable In-Path Support. Specify this option to enable optimization on traffic that is in the direct path of the client, server, and HP EFS WAN Accelerator. Reset Existing Client Connections on Startup. Specify this option to enable kickoff. If you enable kickoff, connections that exist when the HP EFS WAN Accelerator service is started and restarted are disconnected.
Description Out-of-Path Enable Out-of-Path Support. Specify this option to enable out-of-path support. You enable out-of-path support on server-side HP EFS WAN Accelerators only. NOTE: If you set up an out-of-path configuration with failover support, you must set fixed target rules that specify the master and backup HP EFS WAN Accelerators. For detailed information, see “Setting In-Path Rules” on page 25. Connection Limit Per Source IP Connection Limit.
For a list of interactive and secure ports that are automatically forwarded, see Appendix A, “HP EFS WAN Accelerator Ports.” To set an in-path rule 1. Click the Setup tab to expand the Optimization Service menu. 2. Click In-Path Rules to display the Optimization Service - In-Path Rules page. Figure 2-2.
3. Use the controls to complete the configuration, as described in the following table. Description Add New Rule Type. Select one of the following rule types from the drop-down list: • Auto-Discovery. Auto-discovery is the process by which the HP EFS WAN Accelerator automatically intercepts and optimizes traffic on all Internet Protocol (IP) addresses and ports. By default, auto-discovery is applied to all IP addresses and the ports which are not secure or interactive.
Control Description Add New Rule cont. Insert Rule At. Select start, end, or a rule number from the drop-down list. HP EFS WAN Accelerators evaluate rules in numerical order starting with rule 1. If the conditions set in the rule match, then the rule is applied, and the system moves on to the next packet. If the conditions set in the rule do not match, the system consults the next rule. For example, if the conditions of rule 1 do not match, rule 2 is consulted.
Description Advanced Options VLAN Tag ID. Select the VLAN identification number from the drop-down list to set the VLAN tag identification number (VLAN ID). All specifies the rule applies to all VLANs; Untagged specifies the rule applies to non-tagged connections. The HP EFS WAN Accelerator supports VLAN 802.1q. To configure VLAN tagging you perform the following tasks: • You configure in-path rules to apply to all VLANs or to a specific VLAN.
Control Description Advanced Options cont. Neural Framing. Optionally, if you have selected Auto-Discovery or Fixed Target, you can select a neural framing mode for the in-path rule. Neural framing enables the appliance to select the optimal packet framing boundaries for SDR. Neural framing creates a set of heuristics to intelligently determine the optimal moment to flush TCP buffers.
To modify your in-path rule description 1. Click the Setup tab to expand the Optimization Service menu. 2. Click In-Path Rules to display the Optimization Service - In-Path Rules page. Figure 2-3. Optimization Service - In-Path Rules Edit Page 4. Modify the description of the rule in the text box and click Update Description. 5. Click Save to save your settings permanently or click Reset to return the settings to their previous values.
To configure CIFS protocol options 1. Click the Setup tab to expand the Optimization Service menu. 2. Click Protocol: CIFS to display the Optimization Service - Protocol: CIFS page. Figure 2-4.
3. Use the controls to complete the configuration, as described in the following table. Description General Enable Latency Optimization. Latency optimization is enabled by default. Only uncheck this box if you want disable Latency optimization. Typically, you disable latency optimization to troubleshoot problems with the system. Disable Write Optimization. Specify this option to disable write optimization.
Control Description Overlapping Open Enable Overlapping Open Optimization. This option is enabled by default. To prevent any compromise to data integrity, the HP EFS WAN Accelerator only optimizes data to which exclusive access is available (in other words, when locks are granted). When an oplock is not available the HP EFS WAN Accelerator does not perform application-level latency optimizations but still performs Scalable Data Referencing (SDR) and compression on the data as well as TCP optimizations.
To configure MAPI protocol options 1. Click the Setup tab to expand the Optimization Service menu. 2. Click Protocol: MAPI to display the Optimization Service - Protocol: MAPI page. 2 CONFIGURING THE HP EFS WAN ACCELERATOR Figure 2-5. Optimization Service - Protocol: MAPI Page 3. Use the controls to complete the configuration, as described in the following table. Control Description General Enable MAPI Optimization. MAPI optimization is enabled by default.
Control Description MAPI Exchange 2003 Port. Specify the MAPI Exchange 2003 port. Typically, you do not need to modify the default value, 7830. If you have changed the Microsoft Exchange Information Store Interface (MEISI) port in your Exchange Server environment, change port 7830 to the static port number you have configured in your Exchange environment. For further information about changing (MEISI) ports, see the Microsoft Exchange Information Store Interface at http://support.microsoft.com/default.
To configure MS-SQL protocol support 1. Click the Setup tab to expand the Optimization Service menu. Figure 2-6. Optimization Service - Protocol: MS-SQL Page 3. Use the controls to complete the configuration, as described in the following table. Control Description General Enable MS-SQL Optimization. Specify this option to increase optimization for Microsoft Project. Enable MS-SQL Prefetch Fetch-Next. Specify this option to enable prefetching requests to request the next row in MS Project.
Enabling the NFSApplication Streamlining You enable NFS-application streamlining in the Optimization Service - Protocol: NFS page. NFS-application streamlining provides latency optimization improvements for NFS operations primarily by prefetching data, storing it on the client HP EFS WAN Accelerator for a short amount of time, and using it to respond to client requests. You enable NFS-application streamlining where NFS performance over the WAN is impacted by a high latency environment.
2. Use the controls to set NFS options, as described in the following table. Description General Enable NFS Optimization. Specify this option to enable NFS-application streamlining (optimization). You enable NFS-application optimization where NFS performance over the WAN is impacted by a high latency environment. Enable NFS v2 and v4 Alarms. Specify this option to enable alarm notification when v2 and v4 traffic is detected. Default Server Policy.
To modify NFS server settings 1. Click the Setup tab to expand the Optimization Service menu. 2. Click Protocol: NFS to display the Optimization Service - Protocol: NFS page. 3. Click the server name in the NFS Server list to display the Optimization Service Protocol: NFS Server page. Figure 2-8.
4. Use the controls to complete the configuration, as described in the following table. Description Server Settings Server Policy. Select one of the following options from the drop-down list to configure the default policy for NFS servers: • Global Read-Write. Specifies a policy that provides a trade-off of performance for data consistency.
Control Description Add New Volume Configuration FSID. Specify the file system identification number (ID) to add a new NFS volume. Policy. Select one of the following options from the drop-down list to configure the policy for NFS volumes: • Global Read-Write. Specifies a policy that provides a trade-off of performance for data consistency.
Description Enable in-path support. For detailed information, see “Enabling In-Path and Out-of-Path Support” on page 22. Disable the Lempel-Ziv (LZ) compression and SDR in in-path optimization policies. For detailed information about optimization policies if your WAN link capacity is 100 Mbps, see “Setting In-Path Rules” on page 25. With SDR enabled your throughput will bottleneck between 100 and 150 Mbps, which cancels out the benefit of HSTCP.
2. Use the controls to set HSTCP options, as described in the following table. Control Description High-Speed TCP Enable High Speed TCP. Select this option to enable HSTCP: • LAN Send Buffer Size. Specify the send buffer size to set the buffer size used to send data out of the LAN. The default value is 81920. • LAN Receive Buffer Size. Specify the receive buffer size to set the buffer size used to receive data from the LAN. The default value is 32768. • WAN Default Send Buffer Size.
To enable connection pooling 1. Click the Setup tab to expand the Optimization Service menu. Figure 2-10. Optimization Service - Connection Pooling Page 3. Under Connection Pooling Size, type the connection pooling size in the Maximum Connection Pooling Size text box. The default value is 20. TIP: To help you determine whether to modify the default, display the Connection Pooling report, described in “Viewing Connection Pooling” on page 174.
Enabling Transparent Prepopulation You can enable or disable transparent prepopulation in the Optimization Service Prepopulation Settings and Shares page. With transparent prepopulation the HP EFS WAN Accelerator warms the data store with data from the client. When a data store is warm, the HP EFS WAN Accelerator has already seen the data. When data is sent again over the WAN only new or modified data is sent, dramatically increasing the rate of data transfer over the WAN.
4. Use the controls to complete the configuration, as described in the following table. Description Add a Prepopulation Share Enable/Disable. Click Enable to enable prepopulation on the share; click Disable to disable prepopulation on the share. Transparent Prepopulation Using the RCU Enable Transparent Pre-population Support. Specify this option to enable transparent pre-population using the HP Copy Utility (RCU).
When you perform the initial synchronization of the share, a copy of the data is downloaded from the origin server to the HP EFS WAN Accelerator. The HP EFS WAN Accelerator also configures the share for automatic synchronization according to the parameters you specified previously. To initialize and enable a prepopulation share 1. Click the Setup tab to display the Optimization menu. 2. Click to Prepopulation to display the Prepopulation Settings and Shares page. 3.
NOTE: When performing the initial synchronization, or when changing large amounts of data, your bandwidth utilization and other graphs may show pockets of inactivity. This is by design. To modify prepopulation share settings You can modify your prepopulation share settings in the Prepopulation Settings and Shares Details page. 1. Click the Setup tab to expand the Optimization menu. 2. Click Prepopulation to display the Prepopulation Settings and Shares page page. 3.
4. Use the controls to modify your values. Control Description Remote Path Specify the remote path of the origin file server where the share resides. You must use the Uniform Naming Convention (UNC) for the mapped drive for Version 3 shares. For example, \\\ IMPORTANT: The prepopulation share and the origin-server share name cannot contain Unicode characters. The Management Console does not support Unicode characters.
To perform manual actions on prepopulation shares 1. Click the Setup tab to expand the Optimization menu. 2. Click Prepopulation to display the Prepopulation Settings and Shares page. Figure 2-14. Prepopulation Settings and Shares Details Page 4. Select one of the following actions for the prepopulation share, as described in the following table. Control Description Actions Select one of the following actions from the drop-down list: • Start Full Sync.
Setting Host Parameters This section describes how to set host parameters for the HP EFS WAN Accelerator.
To set the primary interface 1. Click the Setup tab to display the Setup menu. 2. Click Host Settings to display the Host Settings - Interface: Primary page. 2 CONFIGURING THE HP EFS WAN ACCELERATOR Figure 2-15. Host Settings - Interface Primary Page 3. Use the controls to complete the configuration, as described in the following table. Control Description IP Address Obtain IP address automatically.
Control Description Additional Interface Settings Speed. Select the speed from the drop-down list. The default value is Auto. If your network routers or switches do not automatically negotiate the speed and duplex, you must manually set the speed and duplex for the primary interface. The speed and duplex must match (LAN and WAN) in an in-path configuration.
Routers are often configured with fixed speed and duplex settings. Check your router configuration and set it to match the HP EFS WAN Accelerator WAN and LAN settings. Make sure your switch has the correct setting. After you finish configuring the HP EFS WAN Accelerator, check for speed and duplex error messages (crc or frame errors) in the Logging, View System Log page of the Management Console.
4. Use the controls to complete the configuration, as described in the following table. Control Description IP Address Obtain IP address automatically. Specify this option to obtain the IP address from a DHCP server. IMPORTANT: The primary and in-path interfaces can share the same subnet. The primary and auxiliary interfaces cannot share the same network subnet. Specify IP Address Manually. Specify this option if you do not use a DHCP server to set the IP address.
Description Additional Interface Settings LAN Speed. Select the speed from the drop-down list to set the speed for the in-path LAN port. The default value is Auto. If your network routers or switches do not automatically negotiate the speed and duplex, you must manually set the speed and duplex for the primary interface. The speed and duplex must match (LAN and WAN) in an in-path configuration.
5. Click Apply to apply your settings to the running configuration. (Apply your settings to test a new configuration before saving them permanently.) 6. Click Save to save your settings permanently or click Reset to return the settings to their previous values. Setting Auxiliary Interfaces You set up an auxiliary interface, which provides support if your network has a dedicated management subnet, in the Host Settings - Interface: AUX page.
4. Use the controls to complete the configuration, as described in the following table. Description AUX Interface Enabled Select Enabled or Disabled from the drop-down list. IMPORTANT: The primary and auxiliary interfaces cannot share the same network subnet. The auxiliary and in-path interfaces cannot share the same subnet. You cannot use the auxiliary port for out-of-path HP EFS WAN Accelerators. IP Address Obtain IP address automatically.
To set a static main route 1. Click the Setup tab to display the Setup menu. 2. Click Host Settings to expand the Host Settings menu. 3. Click Routing: Main to display Host Settings - Routing: Main page. Figure 2-18. Host Settings - Routing: Main Page 4. Use the controls to complete the configuration, as described in the following table. Control Description Add New Route Destination. Specify the IP address. Netmask. Specify the subnet mask. Gateway. Specify the IP address for the gateway.
To set a static, in-path route 1. Click the Setup tab to display the Setup menu. 2. Click Host Settings to expand the Host Settings menu. Figure 2-19. Host Settings - In-Path Routing Page 4. Use the controls to complete the configuration, as described in the following table. Control Description Add New Route Destination. Specify the IP address. Netmask. Specify the subnet mask. Gateway. Specify the IP address for the gateway.
NOTE: You were prompted to configure DNS when you completed the installation wizard. This section describes how you can modify these settings. To set the DNS server 1. Click the Setup tab to display the Setup menu. 2. Click Host Settings to expand the Host Settings menu. 3. Click DNS Settings to display the Host Settings - DNS Settings page. Figure 2-20. Host Settings - DNS Settings Page 4. Use the controls to complete the configuration, as described in the following table.
Modifying the Host Name You can change the host name for the HP EFS WAN Accelerator in the Host Settings - Host Name page. To modify the host name 1. Click the Setup tab to display the Setup menu. 2. Click Host Settings to expand the Host Settings menu. 3. Click Host Name to display the Host Settings - Host Name page. Figure 2-21. Host Settings - Host Name Page 4. Modify the text in the Host Name text box to change the host name. 5. Click Apply to apply your settings to the running configuration.
To map a host name to an IP address 1. Click the Setup tab to display the Setup menu. 2. Click Host Settings to expand the Host Settings menu. 3. Click Hosts to display the Host Settings - Hosts page. Figure 2-22. Host Settings - Hosts Page 4. Use the controls to complete the configuration, as described in the following table. Control Description Add New Host Host IP. Specify the IP address for the host. Host name. Specify a host name. Add Entry. Click Add Entry to add a host and IP address.
Setting proxies is optional. To enable a proxy 1. Click the Setup tab to display the Setup menu. 2 CONFIGURING THE HP EFS WAN ACCELERATOR 2. Click Host Settings to expand the Host Settings menu. 3. Click Proxies to display the Host Settings - Proxies page. Figure 2-23. Host Settings - Proxies Page 4. Use the controls to complete the configuration, as described in the following table. Control Description Web/FTP Proxy IP Address Specify the IP address for the Web/FTP proxy.
Enabling Asymmetric Routing AutoDetection “Enabling Connection Forwarding” on page 68 “Enabling Encryption” on page 70 “Enabling Failover and Data Store Synchronization” on page 73 “Setting Peering Rules” on page 79 “Enabling Quality of Service” on page 81 “Modifying a QoS Class” on page 85 “Setting QoS Marking” on page 87 “Modifying QoS Marking Descriptions” on page 89 “Modifying Service Ports” on page 90 “Enabling Simplified Routing” on page 92 “Enabling WCCP Gr
To enable asymmetric routing auto-detection 1. Click the Setup tab to display the Setup menu. Figure 2-24. Advanced Networking - Asymmetric Routing Page 3. Use the controls to complete the configuration, as described in the following table. Control Description General Settings Enable Asymmetric Routing Detection. Specify this option to detect asymmetric routes in your network. Enable Asymmetric Routing Caching. Specify this option to enable the asymmetric routing cache in the HP EFS WAN Accelerator.
4. Click Save to save your settings permanently or click Reset to return the settings to their previous values. Enabling Connection Forwarding You enable connection forwarding in a network configuration with multiple paths from the server in the Advanced Networking - Connection Forwarding page. You enable connection forwarding only in asymmetric networks; that is, in networks in which a client request traverses a different network path than the server response.
To enable connection forwarding 1. Click the Setup tab to display the Setup menu. Figure 2-26. Advanced Networking - Connection Forwarding Page 3. Use the controls to complete the configuration, as described in the following table. Control Description General Enable Connection Forwarding. Specify this option to enable connection forwarding by default on all neighbors added to the peer list. The default port for connection forwarding is 7850. Port.
Control Description Add New Entry Neighbor IP. Specify the in-path IP address for the neighbor appliance. When you define a neighbor, you must specify the appliance in-path IP address, not the primary IP address. Neighbor Port. Specify the in-path port for the neighbor appliance. The default is 7850. Add Peer. Click Add Peer to add a neighbor to the peer list. Remove Selected Entries. To remove an entry, select it and click Remove Selected Entries. 4.
To enable encryption 1. Click the Setup tab to display the Setup menu. 2. Click Advanced Networking to expand the Advanced Networking menu. Figure 2-27. Advanced Networking - Encryption Page HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 71 2 CONFIGURING THE HP EFS WAN ACCELERATOR 3. Click Encryption to display the Advanced Networking - Encryption page.
4. Use the controls to complete the configuration, as described in the following table. Control Description General Check one or more of the following options: • Enable Authentication and Encryption. Specify this option to enable authentication between appliances. • Enable Perfect Forward Secrecy. Specify this option if you want to provide additional security by renegotiating keys at specified intervals. Perfect Forward Secrecy provides additional security by renegotiating keys at specified intervals.
You enable failover and automatic data store synchronization support in the Advanced Networking - Failover Settings page. Failover support ensures continued optimization if there is a failure with one of the HP EFS WAN Accelerators. If the master HP EFS WAN Accelerator fails, the traffic is automatically processed by the backup HP EFS WAN Accelerator.
To enable failover and data store synchronization 1. Click the Setup tab to display the Setup menu. 2. Click Advanced Networking to expand the Advanced Networking menu. 3. Click Failover Settings to display the Advanced Networking - Failover Settings page. Figure 2-28.
4. Use the controls to complete the configuration, as described in the following table. Description Failover Settings Enable Failover Support. Specify this option to enable failover support. Current Appliance is the. Select Master or Backup from the drop-down list. A master HP EFS WAN Accelerator is the primary appliance; the backup HP EFS WAN Accelerator is the appliance that automatically optimizes traffic if the master appliance fails. You must specify the primary IP address for the backup appliance.
Control Description Automated Online Datastore Settings Enable Automated Online Datastore Synchronization. Specify this option to enable automated data store synchronization. Data store synchronization ensures that each data store in your network has warm data for maximum optimization. All operations occur in the background and do not disrupt operations on any of the systems. There are the following phases in synchronization: • Catchup.
NOTE: In an out-of-path configuration, to implement failover support, you must also specify a fixed target rule that specifies both master and backup target appliances. For detailed information, see “Setting In-Path Rules” on page 25. Enabling NetFlow You enable and configure NetFlow support in the Advanced Networking - NetFlow Export page. NetFlow enables you to export network statistics that provide information about network users and applications, peak usage times, and traffic routing.
To enable NetFlow support 1. Click the Setup tab to display the Setup menu. 2. Click Advanced Networking to expand the Advanced Networking menu. 3. Click NetFlow to display the Advanced Networking - NetFlow Export page. Figure 2-29. Advanced Networking - NetFlow Export Page 4. Use the controls to complete the configuration, as described in the following table. Control Description General Enable NetFlow Export. Specify this option to enable NetFlow support. Apply.
Control Description Add New Entry Collector IP. Specify the IP address for the NetFlow collector. Capture. Select Optimized, Passthrough, or All from the drop-down list. Specifies whether optimized, pass through, or all traffic is exported to the NetFlow collector. The default value is Optimized. Export Interface. Select aux or primary from the drop-down list. NetFlow records sent from the HP EFS WAN Accelerator will appear to be sent from the IP address of the selected interface. Show LAN Address.
Setting peering rules to enable serial clustering is optional. IMPORTANT: HP strongly recommends that only Series 5000s are deployed in a serial cluster due to traffic loads. For detailed information about serial cluster deployments and peering rules, see the HP StorageWorks Enterprise File Services WAN Accelerator Deployment Guide. To set a peering rule 1. Click the Setup tab to display the Setup menu. 2. Click Advanced Networking to expand the Advanced Networking menu. 3.
4. Use the controls to complete the configuration, as described in the following table. Description Add New Rule Type. Select one of the following rule types from the drop-down list: • Auto. Allows built-in functionality to determine the response for peering requests (performs the best peering possible). • Accept. Accepts peering requests that match the source-destination-port pattern. • Pass. Allows pass-through peering requests that match the source and destination port pattern.
QoS allows you to specify priorities for various classes of traffic and properly distributes excess bandwidth among classes. The HP EFS WAN Accelerator allows you to decouple priority (in terms of delay) from the bandwidth allocation. This provides the flexibility needed to support varying degrees of priority and bandwidth traffic patterns, such as high-priority, low-bandwidth traffic patterns (for example, Telnet).
Figure 2-31.
4. Use the controls to complete the configuration, as described in the following table. Control Description General Enable QoS Classification. Specify this option to enable QoS. WAN Bandwidth for Interface XXXX-X. Specify the bandwidth link rate for the WAN interface. This is the bottleneck WAN bandwidth not the interface speed out of the WAN interface into the router or switch.
Description Add New Rule Insert Rule At. To create a QoS rule for a QoS class, select start, end, or a rule number from the drop-down list. Specify an ordered list of rules. HP EFS WAN Accelerators evaluate rules in numerical order starting with rule 1. If the conditions set in the rule match, then the rule is applied, and the system moves on to the next packet. If the conditions set in the rule do not match, the system consults the next rule.
To modify a QoS class 1. Click the Setup tab to display the Setup menu. 2. Click Advanced Networking to expand the Advanced Networking menu. 3. Click QoS Classification to display the Advanced Networking - QoS Classification page. 4. Click the class name in the Classification List to display the Advanced Networking - QoS Classification page Figure 2-32.
5. Use the controls to complete the configuration, as described in the following table. Description QoS Class Priority. Select a priority type from the drop-down list: • Real-Time. Specifies real-time traffic class. Traffic that is your highest priority should be given this value. • Interactive. Specifies an interactive traffic class. • Business Critical. Specifies the business critical traffic class. • Normal Priority. Specifies normal priority traffic class. • Low Priority.
To set a QoS marking 1. Click the Setup tab to display the Setup menu. 2. Click Advanced Networking to expand the Advanced Networking menu. 3. Click QoS Rules to display the Advanced Networking - QoS Marking page. Figure 2-33.
4. Use the controls to complete the configuration, as described in the following table. Description Add New Mappings Insert Rule At. Select start, end, or a rule number from the drop-down list. Specify an ordered list of rules where each rule is the DSCP level used on the inner connection for connections matching the source IP subnet, the destination IP subnet and, optionally, the destination port fields. HP EFS WAN Accelerators evaluate rules in numerical order starting with rule 1.
To modify your QoS rule description 1. Click the Setup tab to expand the Optimization Service menu. 2. Click Advanced Networking expand the Advanced Networking menu. 3. Click Qos Marking to display the Advanced Networking - QoS Marking page. 4. Click Edit Desc in the QoS Rules table to display the Optimization Service - InPath Rules Edit page. Figure 2-34. Advanced Networking - QoS Marking Edit Page 5. Modify the description of the QoS rule in the text box and click Update Description. 6.
To set a service port 1. Click the Setup tab to display the Setup menu. 2. Click Advanced Networking to expand the Advanced Networking menu. Figure 2-35. Advanced Networking - Service Ports Page 4. Use the controls to complete the configuration, as described in the following table. Control Description Add Service Port Service Port. Specify a port number. The default service ports are 7800 and 7810. Add Port. Click Add Port to add the port to the service port list. Set As Default Port.
Enabling Simplified Routing You can enable simplified routing in the Advanced Networking - Simplified Routing page. Simplified routing collects the IP address for the next hop Media Access Control (MAC) address from each packet it receives to use in addressing traffic. Enabling simplified routing eliminates the need to add static routes when the HP EFS WAN Accelerator is in a different subnet from the client and server.
1. Click the Setup tab to display the Setup menu. To enable simplified routing 2. Click Advanced Networking to expand the Advanced Networking menu. Figure 2-36. Advanced Networking - Simplified Routing Page 4. Use the controls to complete the configuration, as described in the following table. Control Description Mappings Data Collection Settings Collect Mappings from. Select one of the following options from the drop-down list: • None. All options are disabled. • Destination Only.
Enabling WCCP Groups You can enable WCCP service groups in the Advanced Networking - WCCP Service Groups page. WCCP enables you to redirect traffic that is not in the direct physical path between the client and the server. To enable WCCP, the HP EFS WAN Accelerator must join a service group at the router. A service group is a group of routers and HP EFS WAN Accelerators which define the traffic to redirect, and the routers and HP EFS WAN Accelerators the traffic goes through. Enabling WCCP is optional.
To enable a WCCP service group 1. Click the Setup tab to display the Setup menu. 2. Click Advanced Networking to expand the Advanced Networking menu. Figure 2-37. Advanced Networking - WCCP Service Groups Page 4. Use the controls to complete the configuration, as described in the following table. Control Description General Enable WCCP v2 Support. Select this box to enable WCCP v2 support on all groups added to the Service Group list. Multicast TTL.
Control Description Add New Service Group Service Group ID. Specify the service group identification number (from 0 to 255). The service group ID is the number that is set on the router. A value of 0 specifies the standard http service group. Router IP. Specify a multicast group IP address or a unicast router IP address. You can specify up to 32 routers. For information on adding additional routers to the group, see “Modifying WCCP Group Settings” on page 96. Password/Confirm Password.
To modify WCCP service group settings 1. Click the Setup tab to display the Setup menu. 2. Click Advanced Networking to expand the Advanced Networking menu. 4. Click the service group ID in the Groups list to display Advanced Networking WCCP Service Group: page. Figure 2-38. Advanced Networking - WCCP Service Group: Page HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 97 2 CONFIGURING THE HP EFS WAN ACCELERATOR 3.
5. Use the controls to complete the configuration, as described in the following table. Control Description Group Settings Password/Confirm Password. Optionally, you can assign a password to the HP EFS WAN Accelerator. This password must be the same password that is on the router. WCCP requires that all routers in a service group have the same password. Passwords are limited to 8 characters. Priority. Specify the WCCP priority for traffic redirection.
Description Routers Add Router IP. Specify a multicast group IP address or a unicast router IP address and click Add Router to add it to the Router list. You can add up to 32 routers. Remove Selected Routers. To remove an entry, select it and click Remove Selected Routers. 6. Click Save to save your settings permanently or click Reset to return the settings to their previous values.
To enable PFS 1. Click the Setup tab to display the Setup menu. 2. Click Proxy File Service to display the Proxy File Service (PFS) - Configuration page. Figure 2-39. Proxy File Service (PFS) - Configuration Page 3. Use the controls to complete the configuration, as described in the following table. Control Description Start Proxy File Service Enable/Disable. Enable or disable PFS support. PFS must be enabled before it is configured.
Description Local Workgroup Settings Workgroup Name. Specify a local workgroup name. If you configure PFS in Workgroup mode the HP EFS WAN Accelerator does not need to join a domain. Workgroup accounts are used by clients when they connect to the HP EFS WAN Accelerator to access PFS shares. NOTE: PFS must be enabled and Local Workgroup Settings must be selected before you can set the Workgroup Name. After you have set a Workgroup Name click the Join button. Join/Leave.
Control Description Other PFS Settings Security Signature Settings. Select one of the following settings: Enabled. This setting supports any type of security signature setting requested by the client machine. Disabled. This is the default setting. In this setting, PFS does not support clients with security signatures set to Required. Required. In this setting, PFS supports clients with security signatures set to Enabled or Required. Idle Connection Timeout.
To set PFS share parameters 1. Click the Setup tab to display the Setup menu. 2. Click Proxy File Service to expand the PFS menu. 4. Click Add a new Proxy Share to display the Proxy File Service (PFS) - Shares page. Figure 2-40. Proxy File Service - Shares Page 5. Use the controls to complete the configuration, as described in the following table. Control Description Local Name Specify the name that you assign to a share on the HP EFS WAN Accelerator. The maximum length is 80 characters.
Control Description Mode Select one of the following options from the drop-down list: • Broadcast. The share originates on the origin server and a read-only copy is available as a share on the branch-office HP EFS WAN Accelerator. The data is updated periodically on the HP EFS WAN Accelerator with the data from the origin server. You specify when and how frequently updates (that is, synchronization) are to occur when you configure a share.
Description Version 2 Server Name. The server located in the data center which hosts the origin data volumes (folders). Port. Specify the port for the server. Version 3 Account. Specify the fully qualified Windows login (including domain) to be used to access the shares folder on the origin file server. For example, \Administrator.
Enabling and Synchronizing Shares After you have configured your PFS shares, you must perform the initial synchronization and enable your shares in the Proxy File Services (PFS) - Shares Details page. When you perform the initial synchronization of the share, a copy of the data is downloaded from the origin server to the HP EFS WAN Accelerator. The HP EFS WAN Accelerator also configures the share for automatic synchronization according to the parameters you specified previously.
5. Click Syncing Enable to download the initial copy of the share from the origin server to the HP EFS WAN Accelerator and to configure the share for automatic synchronization. After you enable sharing, you can map this share from your machine by typing: \\\ 7. Click Save to write your changes to disk or Cancel to cancel your settings.
To upgrade your share 1. Click the Setup tab to display the Setup menu. 2. Click Proxy File Service to expand the PFS menu. 3. Click Shares to display the Proxy File Service - Shares page. 4. In the Shares list click the share name that you want to upgrade. The Proxy File Service (PFS) - Shares Details page appears. Figure 2-42. Proxy File Service (PFS) - Shares Details Page 5. Click Upgrade to Version 3 on Save. The page refreshes with additional controls necessary to configure v3. 6.
Description Password/Password Confirm Specify and confirm the password to be used to access the shares folder on the origin file server. Remote Path Specify the remote path of the origin file server where the share resides. You must use the Uniform Naming Convention (UNC) for the mapped drive for Version 3 shares. For example, \\\ IMPORTANT: The PFS share and the origin-server share name cannot contain Unicode characters.
To modify share settings 1. Click the Setup tab to display the Setup menu. 2. Click Proxy File Service to expand the PFS menu. 3. Click Shares to display the Proxy File Service - Shares page. 4. In the Shares list click the share name that you want to modify. The Proxy File Service (PFS) - Shares page is updated with the share name and current status displayed. Figure 2-43.
5. Use the controls to modify the configuration, as described in the following table. Description Comment Optionally, specify a comment to help you identify the share. Mode Select one of the following options from the drop-down list: • Broadcast. The share originates on the origin server and a read-only copy is available as a share on the branch-office HP EFS WAN Accelerator. The data is updated periodically on the HP EFS WAN Accelerator with the data from the origin server.
Control Description Incremental Sync Interval Specify the frequency of updates (synchronization) in minutes. Full Sync Schedule, Date and Time Specify the date and time that you want updates to start. Use full synchronization if performance is not an issue. The first synchronization, or the initial copy, retrieves data from origin file server and copies it to the local disk on the HP EFS WAN Accelerator. Subsequent synchronizations are based on the synchronization interval.
4. Select one of the following actions for the share, as described in the following table. Description Actions Select one of the following actions from the drop-down list: • Start Verify. Generates a list of the differences between the share on the HP EFS WAN Accelerator and the origin file server. The first time you synchronize a share the data comes from the origin file server. A list of differences is available in the PFS Shares Status report. • Start Full Sync.
If you do not want to automatically forward traffic on these ports, you must delete the Interactive and Secure in-path rules. For detailed information, see “Setting In-Path Rules” on page 25. For information on common port assignments, see Appendix A, “HP EFS WAN Accelerator Ports.” This feature is optional. To create a port label 1. Click the Setup tab to display the Setup menu. 2. Click Port Labels to display the Port Labels page. Figure 2-45. Port Labels Page 3.
4. Click Save to save your settings permanently or click Reset to return the settings to their previous values. To modify ports in a port label You can add or delete ports associated with a port label in the Port Label: page. 1. Click the Setup tab to display the Setup menu. 2. Click Port Labels to display the Port Labels page. 3. Click the port label name in the Port Labels list to display the Port Label - page. Figure 2-46. Port Label: Page 4.
Setting Alarm Parameters To set alarm parameters You can set alarms in Reports - Alarm Settings page. Enabling alarms is optional. 1. Click the Setup tab to display the Setup menu. 2. Click Reports to display the Reports - Alarm Settings page. Figure 2-47. Reports - Alarm Settings Page 3. Use the controls to complete the configuration, as described in the following table. Control Description CPU Alarms Raise Alarm When CPU Utilization Reaches.
Description Warning Temperature Alarm Raise Alarm When Temperature (°C) Reaches. Specify this option to trigger an alarm when the CPU temperature exceeds the rising threshold. When the CPU returns to the reset threshold, the rising alarm is cleared. When the CPU returns to the reset threshold, the rising alarm is cleared. The default value for the rising threshold temperature is 70º C; the default reset threshold temperature is 67º C. Rising Threshold. Specify the rising temperature (º C).
To set event and failure email notification 1. Click the Setup tab to display the Setup menu. 2. Click Reports expand the Reports menu. 3. Click Notification to display the Reports - Notification page. Figure 2-48. Reports - Notification Page 4. Use the controls to complete the configuration, as described in the following table. Control Description Events Report Events to SNMP Agent. Specify this option to report activity to an SNMP agent.
Description SMTP Server SMTP Server. Specify a valid Simple Mail Transfer Protocol (SMTP) server. External DNS and external access for SMTP traffic is required for this feature to function. IMPORTANT: Make sure you provide a valid SMTP server to ensure that the users you specify receive email notifications for events and failures. SMTP Port. Specify a port number for the SMTP server. 5. Click Apply to apply your settings to the running configuration.
Control Description System Location Specify the physical location of the router. Read Only Community Name Specify a string to identify the read-only community. For example: public. 5. Click Apply to apply your settings to the running configuration. (Apply your settings to test a new configuration before saving them permanently.) 6. Click Save to save your settings permanently or click Reset to return the settings to their previous values.
4. Use the controls to complete the configuration, as described in the following table. Description Add New Trap Receiver Receiver IP. Specify the IP address for the SNMP trap. For detailed information about SNMP traps sent to configured servers, see “SNMP Traps” on page 210. Community. Specify the SNMP community name. Type. Select v1 or v2c from the drop-down list to specify the SNMP software version. Enabled. Select True to enable or False to disable the trap receiver. Add Trap Receiver.
1. Click the Setup tab to display the Setup menu. To set monitored ports 2. Click Reports expand the Reports menu. 3. Click Monitored Ports to display the Reports - Monitored Ports page. Figure 2-51. Reports - Monitored Ports Page 4. Use the controls to complete the configuration, as described in the following table. Control Description Add New Port to Monitor Port. Specify the port to be monitored. Description. Specify a description for the monitoring activity. Add Port.
5. Click Save to save your settings permanently or click Reset to return the settings to their previous values. This section describes how to set local and remote logging for the HP EFS WAN Accelerator. It includes the following sections: Setting Local Logging To set up local logging “Setting Local Logging,” next “Setting Remote Logging” on page 124 You set up local logging in the Logging - General Settings page. 1. Click the Setup tab to display the Setup menu. 2.
4. Click Apply to apply your settings to the running configuration. (Apply your settings to test a new configuration before saving them permanently.) 5. Click Save to save your settings permanently or click Reset to return the settings to their previous values. Setting Remote Logging You set remote logging in the Logging - Remote Log Servers page. Remote logging forwards HP EFS WAN Accelerator logs to a remote server you specify. Enabling this feature is optional. To set up remote logging 1.
Setting the Date and Time Setting the Date and Time To set the date and time “Setting the Date and Time,” next “Setting NTP Servers” on page 126 You set the date, time, and time zone in the Date & Time - Set Clock page. 1. Click the Setup tab to display the Setup menu. 2. Click Date & Time to display the Date & Time - Set Clock page. Figure 2-54. Date & Time - Set Clock Page 3. Use the controls to complete the configuration, as described in the following table.
NOTE: If you change the time zone, log messages retain the old time zone until you reboot the HP EFS WAN Accelerator. 4. Click Apply to apply your settings to the running configuration. (Apply your settings to test a new configuration before saving them permanently.) 5. Click Save to save your settings permanently or click Reset to return the settings to their previous values. Setting NTP Servers To set an NTP server You set clock synchronization using NTP in the Date & Time - NTP Servers page.
4. Use the controls to complete the configuration, as described in the following table. Description Add New NTP Server Server IP. Specify the IP address for the NTP server. Version. Select the NTP protocol version number from the drop-down list. Enabled. Select True to enable synchronization; select False to disable. Add Server. Click Add Server to add the NTP server to the list. Enable/Disable. Enable or disable an NTP server. Remove Selected Servers.
} where you replace monitor with admin for write access. For detailed information about setting up RADIUS and TACACS+ servers, see the HP StorageWorks Enterprise File Services WAN Accelerator Deployment Guide. To set an authentication method 1. Click the Setup tab to display the Setup menu. 2. Click Authentication to display the Authentication - General Settings page. Figure 2-56. Authentication - General Settings Page 3.
Description Advanced Authorization Authorization Policy. Optionally, select one of the following options from the dropdown list: • Remote-First. If a local-user mapping attribute is returned and it is a valid local user name, map the authenticated user to the local user specified in the attribute. If the attribute is not present or not valid locally, use the user name specified by the defaultuser command. This is the default behavior. • Remote-Only.
To set the administrator password 1. Click the Setup tab to display the Setup menu. 2. Click Authentication to expand the Authentication menu. 3. Click Account: Admin to display the Authentication - Account: Admin page. Figure 2-57. Authentication - Account: Admin Page 4. Use the controls to complete the configuration, as described in the following table. Control Description Change Password New Password. Specify the new administrator password. The password must have a minimum of 6 characters.
To set the monitor password 1. Click the Setup tab to display the Setup menu. 2. Click Authentication to expand the Authentication menu. Figure 2-58. Authentication - Account: Monitor Page 4. Use the controls to complete the configuration, as described in the following table. Control Description Change Password New Password. Specify the new administrator password. The password must have a minimum of 6 characters. Confirm New Password. Retype the new administrator password. Change Password.
Enabling this feature is optional. To set RADIUS server authentication 1. Click the Setup tab to display the Setup menu. 2. Click Authentication to expand the Authentication menu. 3. Click RADIUS Servers to display the Authentication - RADIUS Servers page. Figure 2-59. Authentication - RADIUS Servers Page 4. Use controls to complete the configuration, as described in the following table. Control Description General Server Key. Specify the server key. Timeout. Specify the time-out period. Retries.
Control Description Add New RADIUS Server Server IP. Specify the server IP address. Server Key. Specify the server key. Timeout. Specify the time-out period. Retries. Specify the number of times you want to allow the user to retry authentication. Valid values are 0-5. Enabled. Select True to enable; select False to disable. Add Server. Click Add Server to add the RADIUS server to the list. Enable/Disable Enable or disable a RADIUS server. Remove Selected Servers Remove Selected Servers.
To set a TACACS+ server 1. Click the Setup tab to display the Setup menu. 2. Click Authentication to expand the Authentication menu. 3. Click TACACS+ Servers to display the Authentication - TACACS+ Servers page. Figure 2-60. Authentication - TACACS+ Servers Page 4. Use the controls to complete the configuration, as described in the following table. Control Description General Server Key. Specify the server key. Timeout. Specify the time-out period. Retries.
Control Description Add New TACACS+ Server Server IP. Specify the server IP address. Authentication Type. Select ASCII or PAP from the drop-down list. Server Key. Specify the server key. Timeout. Specify the time-out period. Retries. Specify the number of times you want to allow the user to retry authentication. Valid values are 0-5. Enabled. Select True to enable; select False to disable. Add Server. Click Add Server to add the TACACS+ server to the list.
To modify Web settings 1. Click the Setup tab to display the Setup menu. 2. Click Authentication to expand the Authentication menu. 3. Click Web Settings to display the Authentication - Web Settings page. Figure 2-61. Authentication: Web Settings Page 4. Use the controls to complete the configuration, as described in the following table. Control Description Login Page Default Login ID. If desired, modify the user name that appears by default on the authentication page. The default is admin.
To set a MOTD 1. Click the Setup tab to display the Setup menu. 2. Click Authentication to expand the Authentication menu. 2 CONFIGURING THE HP EFS WAN ACCELERATOR 3. Click MOTD in to display the Authentication - MOTD page. Figure 2-62. Authentication - MOTD Page 4. Type a message in the MOTD (Message of the Day) text box. 5. Click Apply to apply your settings to the running configuration. (Apply your settings to test a new configuration before saving them permanently.) 6.
To update a license 1. Click the Setup tab to display the Setup menu. 2. Click Licenses to display the Licenses page. Figure 2-63. Licenses Page 3. Use the controls to complete the configuration, as described in the following table. Control Description Add New License Add License. Copy and paste the license key provided by HP into the Add New License(s) text box, and click Add License to add a license. TIP: Separate multiple license keys with a space, tab, or ENTER. Remove Selected Licenses.
Viewing Scheduled Jobs You can view completed, pending, inactive jobs, as well as jobs that were not completed because of an error in the Scheduled Jobs page. The only job you can schedule using the Management Console are software upgrades; for all other jobs, you must use the CLI. For detailed information about scheduling jobs using the CLI, see the HP StorageWorks Enterprise File Services WAN Accelerator Command Line-Interface Reference Manual. To view scheduled jobs 1.
When you Save your configuration settings, the values are written to disk and saved permanently. They take effect after you restart the HP EFS WAN Accelerator service. Each time you save your configuration settings, they are written to the current running configuration, and a backup is created. For example, if the running configuration is myconfig and you save it, myconfig is backed up to myconfig.bak and myconfig is overwritten with the current configuration settings.
To manage configurations 1. Click the Setup tab to display the Setup menu. 2. Click Configuration Manager to display Configuration Manager page. 2 CONFIGURING THE HP EFS WAN ACCELERATOR Figure 2-65. Configuration Manager Page 3. Use the controls to manage configurations, as described in the following table. Control Description Current Configuration Save Configuration. To save settings that have been applied to the running configuration, click Save Configuration. Revert.
Import Configuration From IP/Host Name. Specify the IP address or host name of the HP EFS WAN Accelerator from which you want to import the configuration. Remote Admin Password. Specify the administrator password for the remote HP EFS WAN Accelerator. Remote Config Name. Specify the name of the configuration you want to import from the remote HP EFS WAN Accelerator. New Config Name. Specify a new, local, configuration name for this appliance. Import Shared Data Only. This is enabled by default.
To upgrade or revert software versions 1. Click the Setup tab to display the Setup menu. 2. Click Upgrade Software to display the Software Upgrade page. 2 CONFIGURING THE HP EFS WAN ACCELERATOR Figure 2-66. Software Upgrade Page 3. Use the controls to complete the configuration, as described in the following table. Control Description Install Upgrade From URL. Specify this option and type the URL.
Starting and Stopping Services You can start, stop, and restart the HP EFS WAN Accelerator service in the Start/Stop Services page. The HP EFS WAN Accelerator service is a daemon that execute in the background, performing operations when required. Many of the HP EFS WAN Accelerator service commands are initiated at startup. It is important to restart the HP EFS WAN Accelerator service when you have made changes to your configuration.
Rebooting the HP EFS WAN Accelerator Rebooting the HP EFS WAN Accelerator disrupts existing network connections that are currently proxied through the HP EFS WAN Accelerator. Rebooting can take a few minutes. To reboot the HP EFS WAN Accelerator 1. Click the Setup tab to display the Setup menu. 2. Click Reboot Appliance to display the Reboot Appliance page. Figure 2-68. Reboot Appliance Page 3. Click Reboot Appliance.
To restart the system, you must manually turn on the HP EFS WAN Accelerator. To shutdown the HP EFS WAN Accelerator 1. Click the Setup tab to display the Setup menu. 2. Click Shutdown Appliance to display the Shutdown Appliance page. Figure 2-69. Shutdown Appliance Page 3. Click Shutdown Appliance. After you click Shutdown Appliance, the system is turned off. To restart the system you must manually turn on the HP EFS WAN Accelerator.
In This Chapter Creating HP EFS WAN Accelerator Reports and Logs This chapter describes how to create and view performance, network, health, Proxy File Service (PFS), export, and diagnostic reports. It also describes how to view HP EFS WAN Accelerator logs, contact technical support, and the online help table of contents.
Creating Bandwidth Optimization Reports The Performance - Bandwidth Optimization report summarizes the overall inbound and outbound bandwidth improvements for your network using the HP EFS WAN Accelerator. You can create reports according to the time period of your choice, application, and type of traffic. The Performance - Bandwidth Optimization report includes the following table of statistics that describe bandwidth activity for the time period you specify.
The HP EFS WAN Accelerator system polls bandwidth and connection metrics every second and can report on performance for periods as long as one year. However, due to performance and disk space considerations, data representation in reports for periods longer than the Last 5 Minutes are interpolated from aggregate data points. To create a Bandwidth Optimization report 1. Click the Reports tab to display the Performance - Bandwidth Optimization page. Figure 3-1.
2. Use the controls to customize the report, as described in the following table. Control Description Period Select Last Minute, Last 5 Minutes, Last Hour, Last Day, Last Week, Last Month, or Custom Interval from the drop-down list. Application Select FTP, HTTP, CIFS:NetBIOS, CIFS:TCP, or MAPI from the drop-down list. The default value is All. Traffic Select Bi-directional, WAN-to-LAN, or LAN-to-WAN from the drop-down list. Appliances The default is to include all appliances.
How much optimization occurred through disk hits? How much optimization occurred through memory hits? How much data traversed the WAN without optimization? In bar-graph and line-graph reports, the x-axis (or tick mark) plots time, according to the interval you select. The y-axis plots the metric of interest, such as gigabytes (GB) of bandwidth, percent (%) of data reduction, connection counts, and the like.
To create the Data Store Hits report 1. Click the Reports tab to display the Performance - Bandwidth Optimization page. 2. Under Performance in the left menu, click Data Store Hit Rate to display the Performance - Data Store Hits page. Figure 3-2. Performance - Data Store Hit Rate Page 3. Select Last 5 Minutes, Last Hour, Last Day, Last Week, or Last Month from the drop-down list. TIP: To refresh your report every 15 seconds, click 15s. To refresh your report every 30 seconds, click 30s.
The Performance - Data Reduction report includes the following table of statistics that describe data reduction for the application and the time period you specify. About Report Graphs Description Total Data Reduction % Over Last Week Specifies the total decrease of data transmitted over the WAN. Peak Data Reduction % Over Last Week Specifies the peak decrease in data transmitted over the WAN. Peak Data Reduction Occured At Specifies the time that the peak data reduction occured.
To create the Data Reduction report 1. Click the Reports tab to display the Performance - Bandwidth Optimization page. 2. Under Performance in the left menu, click Data Reduction to display the Performance - Data Reduction page. Figure 3-3.
3. Use the controls to customize the report, as described in the following table. Description Period Select Last Hour, Last Day, Last Week, or Last Month from the drop-down list. Application Select FTP, HTTP, CIFS:NetBIOS, CIFS:TCP, or MAPI from the drop-down list. The default value is All. Traffic Select Bi-directional, WAN-to-LAN, or LAN-to-WAN from the drop-down list. Resolution Select High, Medium, or Low from the Resolution drop-down list.
A diamond icon above the top margin of the graph points to the value on the x-axis (the time) at which the peak occurred. A diamond icon outside the right margin of the graph points to the value on the y-axis (for example, the percent) that is the average value for the time period selected. Pie chart graphs do not indicate peaks or averages. Pie chart graphs represent the aggregate for the time period selected.
3. Use the controls to customize the report, as described in the following table.. Description Period Select Last Hour, Last Day, Last Week, or Last Month from the drop-down list. Response Select All, Local, Remote, or Delayed from the drop-down list. The default value is All. Server Select the server for which you want to collect statistics from the drop-down list. Resolution Select High, Medium, or Low from the Resolution drop-down list.
A diamond icon outside the right margin of the graph points to the value on the y-axis (for example, the percent) that is the average value for the time period selected. Pie chart graphs do not indicate peaks or averages. Pie chart graphs represent the aggregate for the time period selected. About Report Data To create the Throughput report The HP EFS WAN Accelerator system polls bandwidth and connection metrics every second and can report on performance for periods as long as one year.
3. Use the controls to customize the report, as described in the following table.. Description Period Select Last Hour, Last Day, Last Week, or Last Month from the drop-down list. Application Select FTP, HTTP, CIFS:NetBIOS, CIFS:TCP, or MAPI from the drop-down list. The default value is All. Traffic Select Bi-directional, WAN-to-LAN, or LAN-to-WAN from the drop-down list. Resolution Select High, Medium, or Low from the Resolution drop-down list.
The Performance - Traffic Summary report contains the following table of statistics that summarize traffic activity by network protocol. Field Description Total Traffic Specifies the total amount of traffic transmitted. FTP (21) Specifies the amount of File Transfer Protocol (FTP) data transmitted. (This also includes FTP data from other ports.) HTTP (80) Specifies the amount of Hypertext Transfer Protocol (HTTP) data transmitted.
About Report Data 1. Click the Reports tab to display the Performance - Bandwidth Optimization page. 2. Under Performance in the left menu, click Traffic Summary to display the Performance - Traffic Summary page. Figure 3-6.
3. Use the controls to customize the report, as described in the following table.. Control Description Period Select Last Hour, Last Day, Last Week, or Last Month from the drop-down list. Type Select Optimized, Pass-Through, or Both from the drop-down list. The default value is Optimized. Refresh Set a rate to refresh the report display: • To refresh your report every 15 seconds, click 15 Seconds. • To refresh your report every 30 seconds, click 30 Seconds. • To turn off refresh, click Off.
What This Report Tells You Do I have a current connection with my active HP EFS WAN Accelerator? How much synchronization has occurred on the data store since the synchronization request? What percentage of the data store is unused? 1. Click the Reports tab to display the Performance - Bandwidth Optimization page. 2. Under Appliance in the left menu, click Data Store to display the Network Connected Appliances page. Figure 3-7.
The Appliance - TCP Statistics report contains the following table of statistics that summarize TCP activity. What This Report Tells You 164 Packet Type Description Packets Received Specifies the total packets received. Packets Sent Specifies the total TCP packets sent. Packets Retransmitted Specifies the total TCP packets retransmitted. Timeouts Specifies the number of time-outs. Loss Events Specifies the total number of loss events.
To create the TCP Statistics report 1. Click the Reports tab to display the Performance - Bandwidth Optimization page. Figure 3-8. Appliance - TCP Statistics Page TIP: To print your report, click the Printer icon in the upper right corner of the page. Viewing Networking Reports The following section describes how to create and view networking reports.
“Viewing Interface Statistics” on page 177 “Creating Link State Reports” on page 178 “Creating Neighbor Statistic Reports” on page 181 “Creating QoS Statistics Reports” on page 182 Viewing Connected Appliances Reports The Network - Connected Appliances report lists the connected remote HP EFS WAN Accelerators that are connected to the HP EFS WAN Accelerator.
To create the Connected Appliances report 1. Click the Reports tab to display the Performance - Bandwidth Optimization page. Figure 3-9. Network - Connected Appliances Page TIP: Click the appliance name or IP address in the Connected Appliance list to open the Management Console for the specified system in a new browser window. TIP: To print your report, click the Printer icon in the upper right corner of the page.
The Network - Connection History report contains the following table of statistics that summarize connection activity. Packet Type Description Optimized Connections Specifies the total active connections optimized. Flowing Connections Specifies the total established active connections. Half Opened Specifies the total half-opened active connections. A halfopened connection is a TCP connection in which the connection has not been fully established.
About Report Data 1. Click the Reports tab to display the Performance - Bandwidth Optimization page. 2. Under Network in the left menu, click Connection History to display the Network - Connection History page. Figure 3-10. Network - Connection History Page 3. Use the controls to customize the report, as described in the following table.. Control Description Period Select Last Hour, Last Day, Last Week, or Last Month from the drop-down list.
Viewing Current Connections The Network - Current Connections report displays the connections that are intercepted through the HP EFS WAN Accelerator, including the connections that are passed through unoptimized. The Network - Current Connections report contains the following Current Connections table of statistics that summarize current connections. Packet Type Description Established Specifies the total established active connections. Half Opened Specifies the total half-opened active connections.
What This Report Tells You How many connections were established? How many connections were half-opened? How many connections were half-closed? How many connections were denied or discarded? 1. Click the Reports tab to display the Performance - Bandwidth Optimization page. 2. Under Network in the left menu, click Current Connections to display the Network - Current Connections page. Figure 3-11.
NOTE: If the connection is in an unknown state, the line is greyed-out. 3. Use the controls to customize the report, as described in the following table.. Control Description Filter Specify an IP address or port number in the Filter text box to filter the report. Type All. Specifies all established active connections. • Established (Optimized) Only. Specifies the total established active connections. • Half-Opened (Optimized) Only. Specifies the total half-opened active connections.
The Network - Current Connections report contains the following table that summarizes current connection details. Description Type Specifies the type of connection. Source Specifies the source IP address for the connection. Destination Specifies the destination IP address for the connection. Peer Appliance Specifies the IP address of the remote HP EFS WAN Accelerator the connection is going through.
To view current connection details 1. Click the Reports tab to display the Performance - Bandwidth Optimization page. 2. Under Network in the left menu, click Current Connections to display the Network - Current Connections page. 3. Click the magnifying-glass next to the HP EFS WAN Accelerator name to display the Network - Current Connections Details page. Figure 3-12. Network - Current Connections Details Page TIP: To send keep-alive messages for this system, click Send Keep Alive.
What This Report Tells You How large is the pool of connections? How many connections occurred? In bar-graph and line-graph reports, the x-axis (or tick mark) plots time, according to the interval you select. The y-axis plots the metric of interest, such as gigabytes (GB) of bandwidth, percent (%) of data reduction, connection counts, and the like. A diamond icon above the top margin of the graph points to the value on the x-axis (the time) at which the peak occurred.
To create the Connection Pooling report 1. Click the Reports tab to display the Performance - Bandwidth Optimization page. 2. Under Network in the left menu, click Connection Pooling to display the Network - Connection Pooling page. Figure 3-13. Network - Connection Pooling Page 3. Use the controls to customize the report, as described in the following table.. Control Description Period Select Last Hour, Last Day, Last Week, or Last Month from the drop-down list.
The Network - Interfaces Statistics report summarizes the statistics for the primary, inpath LAN and WAN, and auxiliary interfaces. It also displays the IP address, speed, duplex, MAC address, and current status for each interface. TIP: For auto-negotiated speed and duplex settings the Network - Interfaces Statistics report displays the speed at which they were negotiated. The Network - Interfaces Statistics report displays the following statistics.
To view Interface Statistics 1. Click the Reports tab to display the Performance - Bandwidth Optimization page. 2. Under Network in the left menu, click Interface Statistics to display the Network Interface Statistics page. Figure 3-14. Network - Interface Statistics Page TIP: To print your report, click the Printer icon in the upper right corner of the page. Creating Link State Reports 178 The Network - Link State report summarizes the loss rate for the HP EFS WAN Accelerator.
What This Report Tells You The Network - Link State report answers the following question: About Report Graphs In bar-graph and line-graph reports, the x-axis (or tick mark) plots time, according to the interval you select. The y-axis plots the metric of interest, such as gigabytes (GB) of bandwidth, percent (%) of data reduction, connection counts, and the like.
To create the Link State report 1. Click the Reports tab to display the Performance - Bandwidth Optimization page. 2. Under Network in the left menu, click Link State to display the Network - Link State page. Figure 3-15. Network - Link State Page 3. Use the controls to customize the report, as described in the following table.. Control Description Period Select Last Hour, Last Day, Last Week, or Last Month from the drop-down list. Statistic Select Loss Rate from the drop-down list.
The Network - Neighbor Statistics report summarizes number of bytes or packets transferred between the HP EFS WAN Accelerator and a specified neighbor.
To create the Neighbor Statistics report 1. Click the Reports tab to display the Performance - Bandwidth Optimization page. 2. Under Network in the left menu, click Neighbor Statistics to display the Network - Neighbor Statistics page. Figure 3-16. Network - Neighbor Statistics Page 3. Use the controls to customize the report, as described in the following table.. Control Description Period Select Last Hour, Last Day, Last Week, or Last Month from the drop-down list.
The Network - QoS Statistics report contains the following Data table of statistics that summarize current connections. About Report Graphs Description Data Sent Specifies the total amount of data sent over the WAN for the QoS class. Data Dropped Specifies the total amount of data packets that were dropped for the QoS class. Peak Data % Over Last Week Specifies the peak amount of data transmitted over the last week. Pass Data % Occurred At Specifies when the peak data transmission occurred.
To create the QoS Statistics report 1. Click the Reports tab to display the Performance - Bandwidth Optimization page. 2. Under Network in the left menu, click QoS Statistics to display the Network - QoS Statistics page. Figure 3-17. Network - QoS Statistics Page 3. Use the controls to customize the report, as described in the following table.. Control Description Period Select Last Hour, Last Day, Last Week, or Last Month from the drop-down list.
Viewing System Health Reports Viewing Alarm Status Reports “Viewing Alarm Status Reports,” next “Creating CPU Utilization Reports” on page 188 “Creating Memory Paging Reports” on page 190 The Health - Alarm Status report provides status for the HP EFS WAN Accelerator alarms. The Health -Alarm Status report contains the following table of statistics that summarize traffic activity by application. Alarm Description Admission Control Whether the system connection limit has been reached.
Alarm Description Memory Paging Whether the system has reached the memory paging threshold. If 100 pages are swapped approximately every two hours the HP EFS WAN Accelerator is functioning properly. If thousands of pages are swapped every few minutes, then reboot the HP EFS WAN Accelerator. For detailed information, see “Rebooting the HP EFS WAN Accelerator” on page 145. If rebooting does not solve the problem, contact HP technical support. Network Bypass Whether the system is in bypass mode.
Description Proxy File Service Connection Error Whether there has been a PFS connection error. If a connection error is detected, restart the HP EFS WAN Accelerator service and PFS. For detailed information, see “Enabling Proxy File Service” on page 99 and “Starting and Stopping Services” on page 144. Proxy File Service Operation Failed Whether a synchronization operation has failed. If an operation failure is detected, attempt the operation again.
To create the Alarm Status report 1. Click the Reports tab to display the Performance - Bandwidth Optimization page. 2. Under Health in the left menu, click Alarm Status to display the Health - Alarm Status page. Figure 3-18. Health - Alarm Status Page NOTE: To print your report, click the Printer icon in the upper right corner of the page. Creating CPU Utilization Reports The Health - CPU Utilization report summarizes the percentage of the CPU utilized in the time period specified.
A diamond icon above the top margin of the graph points to the value on the x-axis (the time) at which the peak occurred. Pie chart graphs do not indicate peaks or averages. Pie chart graphs represent the aggregate for the time period selected. To create the CPU Utilization report 1. Click the Reports tab to display the Performance - Bandwidth Optimization page. 2. Under Health in the left menu, click CPU Utilization to display the Health - CPU Utilization page. Figure 3-19. Health - CPU Utilization Page.
3. Use the controls to customize the report, as described in the following table.. Control Description Period Select Last Hour, Last Day, Last Week, or Last Month from the drop-down list. Refresh Set a rate to refresh the report display: • To refresh your report every 15 seconds, click 15 Seconds. • To refresh your report every 30 seconds, click 30 Seconds. • To turn off refresh, click Off. NOTE: The refresh rate does not affect polling. Polling occurs every 5 minutes.
Pie chart graphs do not indicate peaks or averages. Pie chart graphs represent the aggregate for the time period selected. 1. Click the Reports tab to display the Performance - Bandwidth Optimization page. 2. Under Health in the left menu, click Memory Paging to display the Health Memory Paging page. Figure 3-20. Health - Memory Paging Page 3. Use the controls to customize the report, as described in the following table.
Viewing Proxy File Service Reports The following section describes the Proxy File Share (PFS) Status report. It includes the following sections: “Viewing PFS Share Status Reports,” next “Viewing PFS Statistics” on page 193 Viewing PFS Share Status Reports The PFS Share Status report provides information about your PFS shares: the size of the share and the status of the share. For detailed information, see “Enabling Proxy File Service” on page 99.
To view the PFS Share Status report 1. Click the Reports tab to display the Performance - Bandwidth Optimization page. 2. Click Share Status in the left menu to display the PFS - Share Status page. 3 CREATING HP EFS WAN ACCELERATOR REPORTS AND Figure 3-21. PFS - Share Status Page TIP: Click the local name to display the PFS - Shares page. Viewing PFS Statistics The PFS Statistics report summarizes PFS connection statistics for the time period specified.
The PFS Statistics report contains the following table of statistics that summarize PFS activity. What this Report Tells You About Report Graphs Packet Type Description Bytes Received Specifies the total bytes received on the specified share. Peak Bytes Received Over Last Month Specifies the peak number of bytes received over the last month on the specified share. Peak Bytes Occurred At Specifies the date and time for the peak activity for the share.
To view the PFS Share: Name-of-Share report 1. Click the Reports tab to display the Performance - Bandwidth Optimization page. 2. Click Statistics in the left menu to display the PFS Statistics page. 3 CREATING HP EFS WAN ACCELERATOR REPORTS AND Figure 3-22. PFS Statistics Page 3. Use the controls to customize the report, as described in the following table.. Control Description Period Select Last Hour, Last Day, Last Week, or Last Month from the drop-down list.
Exporting Performance Statistics Reports The following section describes how to export performance statistics reports. Exporting Performance Statistics You can export performance statistics in comma-separated value (CSV) format in the Export - Statistics report. The CSV format allows you to easily import the statistics into spreadsheets and databases. You can open the CSV file in any text editor. The CSV file contains commented lines (comments beginning with the # character) at the beginning of the file.
3. Use the controls to customize the report, as described in the following table.. Description Report Select the report you want to export from the drop-down list. After Specify a date and time from which the statistics should begin in the After text box. Use the following format: YYYY/MM/DD HH:MM:SS. Before Specify a date and time from which the statistics should begin in the After text box. Use the following format: YYYY/MM/DD HH:MM:SS Export Click Export to export your data.
To view system dump files 1. Click the Reports tab to display the Performance - Bandwidth Optimization page. 2. Under Diagnostic in the left menu, click System Dumps to display the Diagnostic - System Dumps page. Figure 3-24. Diagnostic - System Dumps Page 3. Click the file name to open a file save dialog box to download the file. 4. Click Generate System Dump Now to generate a new system dump. TIP: To remove an entry, click the check box next to the name and click Remove Selected Files.
To view system snapshot files 1. Click the Reports tab to display the Performance - Bandwidth Optimization page. Figure 3-25. Diagnostic - System Snapshots Page 3. Click the file name to open a file save dialog box to download the file. TIP: To remove an entry, click the check box next to the name and click Remove Selected Files. Viewing TCP Dump Files The Diagnostic -TCP Dumps report displays a list of system snapshot files and their size.
To view TCP dump files 1. Click the Reports tab to display the Performance - Bandwidth Optimization page. 2. Under Diagnostic in the left menu, click TCP Dump to display the Diagnostic TCP Dump page. Figure 3-26. Diagnostic - TCP Dump Page 3. Click the file name to open a file save dialog box to download the file. TIP: To remove an entry, click the check box next to the name and click Remove Selected Files.
To view HP EFS WAN Accelerator logs You can view HP EFS WAN Accelerator logs in the Logging: System Log report. Use system logs to monitor HP EFS WAN Accelerator activity and to troubleshoot problems with the system. The most recent log events are listed first. 1. Click the Logging tab to display the Logging: System Log page. Figure 3-27. Logging: Current Log Page 2. Use the controls to customize your logs, as described in the following table.
Getting Help The following section describes how to obtain help with your HP EFS WAN Accelerator. It includes the following sections: Contacting Technical Support “Contacting Technical Support,” next “Viewing Online Help Contents” on page 202 You can obtain the technical support phone number from the Help: Technical Support page. TIP: Under Website, click the Web site link to go to the HP technical support Web site.
In This Appendix HP EFS WAN Accelerator Ports This appendix describes the HP EFS WAN Accelerator default and supported secure ports.
IMPORTANT: For two HP EFS WAN Accelerators to optimize traffic, ports 7800 and 7810, must be passed through firewall devices located between the pair of HP EFS WAN Accelerators. Also, SYN and SYN/ACK packets with the TCP option 76 must be passed through firewalls for autodiscovery to function properly. For the HP EFS WAN Accelerator Manager, port 22 must be passed through the firewall for it to function properly. Commonly Optimized Ports The HP EFS WAN Accelerator by default optimizes all ports.
Interactive Ports Forwarded by the HP EFS WAN Accelerator TIP: If you do not want to automatically forward these ports, simply delete the Interactive rule in the Management Console. The following table lists the interactive ports that are automatically forwarded by the HP EFS WAN Accelerator.
Secure Ports Forwarded by the HP EFS WAN Accelerator A default in-path rule with the port label Secure is automatically created in your system. This in-path rule automatically passes through traffic on commonly secure ports (for example, ssh, https, and smtps). TIP: If you do not want to automatically forward these ports, simply delete the Secure rule in the Management Console. The following table lists the common secure ports that are automatically forwarded by the HP EFS WAN Accelerator.
The following table contains the uncommon ports automatically forwarded by the HP EFS WAN Accelerator.
Type Port Description sdo-ssh 3897/tcp Simple Distributed Objects over SSH iss-mgmt-ssl 3995/tcp ISS Management Svcs SSL suucp 4031/tcp UUCP over SSL wsm-server-ssl 5007/tcp wsm server ssl sip-tls 5061/tcp SIP-TLS imqtunnels 7674/tcp iMQ SSL tunnel davsrcs 9802/tcp WebDAV Source TLS/SSL intrepid-ssl 11751/tcp Intrepid SSL rets-ssl 12109/tcp RETS over SSL HP EFS WAN ACCELERATOR PORTS
In This Appendix HP EFS WAN Accelerator MIB This appendix describes the HP EFS WAN Accelerator Enterprise Simple Network Management Protocol (SNMP) Message Information Base (MIB).
SNMP Traps The following table summarizes the Simple Network Management Protocol (SNMP) traps sent out from the HP EFS WAN Accelerator to configured trap receivers. Trap Description procCrash (enterprises.17163.1.1.4.1) A process has crashed and subsequently been restarted by the system. A system snapshot associated with this crash has been created on the HP EFS WAN Accelerator and is accessible via the CLI or Management Console.
Description admissionMemError (enterprises.17163.1.1.4.10) The HP EFS WAN Accelerator is optimizing traffic beyond its rated capability. During this event, the HP EFS WAN Accelerator will continue to optimize existing connections, but new connections will be passed through without optimization. admissionConnError (enterprises.17163.1.1.4.11) The HP EFS WAN Accelerator is optimizing a number of connections beyond its rated capability.
config OBJECT IDENTIFIER ::= { steelhead 3 } alarms OBJECT IDENTIFIER ::= { steelhead 4 } statistics OBJECT IDENTIFIER ::= { steelhead 5 } ---- SYSTEM --model OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Appliance model" ::= { system 1 } serialNumber OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Appliance serial number" ::= { system 2 } systemVersion OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "System
STATUS current DESCRIPTION "Current service status" ::= { status 3 } B - HP EFS WAN ACCELERATOR MIB serviceUptime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "Current service uptime" ::= { status 4 } procTable OBJECT-TYPE SYNTAX SEQUENCE OF ProcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of managed processes" ::= { status 5 } procEntry OBJECT-TYPE SYNTAX ProcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry for one process" INDEX { proc
MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times process has crashed or exited unexpectedly" ::= { procEntry 4 } peerStatus OBJECT IDENTIFIER ::= { status 6 } peerTable OBJECT-TYPE SYNTAX SEQUENCE OF PeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of peers" ::= { peerStatus 1 } peerEntry OBJECT-TYPE SYNTAX PeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry for one peer" INDEX { peerIndex } ::= { peerTable 1 } PeerEntry ::= SEQUENCE { peerIndex peerHost
"IP address of peer" ::= { peerEntry 4 } B - HP EFS WAN ACCELERATOR MIB peerModel OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Model of peer" ::= { peerEntry 5 } ---- CONFIG --activeConfig OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Current active configuration" ::= { config 1 } inpath OBJECT IDENTIFIER ::= { config 2 } inpathSupport OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "In-path support" ::= {
procExit NOTIFICATION-TYPE OBJECTS { procName } STATUS current DESCRIPTION "A procExit trap signifies that a process managed by PM has exited unexpectedly, but not left a core file. The variable sent with the notification indicates which process exited.
"Admission control connections alarm has been triggered" ::= { alarmsPrefix 11 } serviceError NOTIFICATION-TYPE STATUS current DESCRIPTION "There has been a service error.
"A fan error has been detected on the appliance. Not supported on all models" ::= { alarmsPrefix 21 } memoryError NOTIFICATION-TYPE STATUS current DESCRIPTION "A memory error has been detected on the appliance.
STATUS current DESCRIPTION "Entry for one cpu" INDEX { cpuIndivId } ::= {cpuIndivUtilTable 1 } B - HP EFS WAN ACCELERATOR MIB CPUIndivUtilEntry ::= SEQUENCE { cpuIndivIndex cpuIndivId cpuIndivIdleTime cpuIndivSystemTime cpuIndivUserTime } Unsigned32, Unsigned32, Unsigned32, Unsigned32, Unsigned32 cpuIndivIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index for the table" ::= { cpuIndivUtilEntry 1 } cpuIndivId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessib
::= { connectionCounts 1 } passthroughConnections OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current total number of pass-through connections" ::= { connectionCounts 2 } halfOpenedConnections OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current total number of half-opened (optimized) connections" ::= { connectionCounts 3 } halfClosedConnections OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current total nu
bwAggOutLan OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total bytes LanToWan LAN side since last restart of service" ::= { bandwidthAggregate 3 } bwAggOutWan OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total bytes LanToWan WAN side since last restart of service" ::= { bandwidthAggregate 4 } bandwidthPerPort OBJECT IDENTIFIER ::= { bandwidth 2 } bwPortTable OBJECT-TYPE SYNTAX SEQUENCE OF BWPortEntry MAX-ACCESS not-accessible STATUS current D
MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes WanToLan LAN side since last restart of service" ::= { bwPortEntry 2 } bwPortInWan OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes WanToLan WAN side since last restart of service" ::= { bwPortEntry 3 } bwPortOutLan OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Bytes LanToWan LAN side since last restart of service" ::= { bwPortEntry 4 } bwPortOutWan OBJECT-TYPE SYNTAX Counter32 MAX-ACCES
datastore OBJECT IDENTIFIER ::= { statistics 4 } missTotal OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of datastore misses since last restart of service" ::= { datastore 2 } END HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 223 B - HP EFS WAN ACCELERATOR MIB hitsTotal OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of datastore hits since last restart of service" ::= { datastore 1 }
B - HP EFS WAN ACCELERATOR MIB
GLOSSARY Glossary ARP. Address Resolution Protocol. An IP protocol used to obtain a node's physical address. Bandwidth. The upper limit on the amount of data, typically in kilobits per second (kbps), that can pass through a network connection. Greater bandwidth indicates faster data transfer capability. Bit. A Binary digit. The smallest unit of information handled by a computer; either 1 or 0 in the binary number system. Blade.
FDDI. Fiber Distributed Data Interface. A set of American National Standards Institute (ANSI) protocols for sending digital data over fiber optic cable. FDDI networks are token-passing networks, and support data rates of up to 100 Mbps (100 million bits) per second. FDDI networks are typically used as backbones for WideArea Networks (WANs). Filer. An appliance that attaches to a computer network and is used for data storage. Gateway.
Internet. The collection of networks tied together to provide a global network that use the TCP/IP suite of protocols. IP. Internet protocol. Network layer protocol in the TCP/IP stack that enables a connectionless internetwork service. IPsec. Internet Protocol Security Protocol. A set of protocols to support secure exchange of packets at the IP layer. IPsec has been deployed widely to implement Virtual Private Networks (VPNs). IPsec supports two encryption modes: Transport and Tunnel.
state algorithms to send routing information to all nodes in an internetwork by calculating the shortest path to each node based on a topography of the Internet constructed by each node. Each router sends that portion of the routing table (keeps track of routes to particular network destinations) that describes the state of its own links. It also sends the complete routing structure (topography). Packet. A unit of information transmitted, as a whole, from one device to another on a network. Probe.
A Administrative password, setting 129 Admission Control alarm status 185 Alarm status admission control 185 Data Store 185 licensing 185 link state 185 memory paging 186 network bypass 186 optimization service 186 PFS connection error 187 operation failed 187 partition full 186 RAID 187 service alarm 186 software version mismatch 187 System Disk Full 187 temperature 187 Alarm Status report 188 Alarm status, viewing 185 Alarm thresholds, setting 116 Appliance logs, viewing 201 Asymmetric routing auto-detect
DNS server 62 setting 61 Duplex, tips for setting 54 E Email notification, setting 117 Enabling asymmetric routing auto-detection 67 cache 67 connection forwarding 69 encryption 70 NetFlow 77 NFS optimization 38 peering rules 79 PFS 99 QoS classification 82 WCCP groups 94 Encryption, enabling 70 Enterprise MIB accessing 209 example of 211 Event and failure notification, setting 117 Exchange 2003 support, enabling 35 Exchange port, setting for firewalls 36 F Failover 73 Fixed-target rules, overview of 27 FTP
Primary interface modifying 52 setting 52 Priorities, QoS 82 O Optimization service alarm status 186 Out-of-path, overview of 22 Overlapping open 34 Overview of asymmetric routing auto-detection 66 of CIFS transparent prepopulation 47 of fixed-target rules 27 of NFS optimization 38 of pass-through rules 27 of port labels 113 of QoS 82 Q QoS class, modifying 85 classification, enabling 82 overview of 82 priorities 82 rule descriptions, modifying 89 service ports for multiple mappings 90 setting rules for 8
S Scheduled jobs, viewing 139 Secure ports automatically forwarded 206 forwarding traffic on 113 Secure-CIFs feature, enabling 33 Serial clustering 79 Service alarm status 186 Service halted 16 Service ports, setting 90 Services, starting, stopping, restarting 144 Setting alarm thresholds 116 auxiliary interface 58 backup appliance 73 clock synchronization 126 date and time 125 DNS 61 email notification 117 event notification 117 failure notification 117 FTP proxies 64 in-path static network routes 60 local