HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Management Console user guide (AG421-96002, March 2007)

128 CONFIGURING THE HP EFS WAN ACCELERATOR
}
where you replace monitor with admin for write access.
For detailed information about setting up RADIUS and TACACS+ servers, see the HP
StorageWorks Enterprise File Services WAN Accelerator Deployment Guide.
To set an
authentication method
1. Click the Setup tab to display the Setup menu.
2. Click Authentication to display the Authentication - General Settings page.
Figure 2-56. Authentication - General Settings Page
3. Use the controls to complete the configuration, as described in the following table.
Control Description
Authentication Methods Method 1. Select Local, RADIUS, or TACACS+ from the drop-down list.
NOTE: Make sure you put the authentication methods in the order in which you want
them to occur. If authorization fails on the first method, the next method is attempted, and
so forth, until all the methods have been attempted.
Method 2. Select None, Local, RADIUS, or TACACS+ from the drop-down list.
Method 3. Select None, Local, RADIUS, or TACACS+ from the drop-down list.