HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Management Console user guide (AG421-96002, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 131
2 CONFIGURING THE HP EFS
WAN A
CCELERATOR
To set the monitor
password
1. Click the Setup tab to display the Setup menu.
2. Click Authentication to expand the Authentication menu.
3. Click Account: Monitor to display the Authentication - Account: Monitor page.
Figure 2-58. Authentication - Account: Monitor Page
4. Use the controls to complete the configuration, as described in the following table.
5. Click Save to save your settings permanently or click Reset to return the settings
to their previous values.
Setting RADIUS
Servers
You set up RADIUS server authentication in the Authentication - RADIUS Servers
page.
RADIUS is an access control protocol that uses a challenge and response method for
authenticating users. Setting up RADIUS server authentication is optional.
For detailed information about setting up RADIUS and TACACS+ servers, see the HP
StorageWorks Enterprise File Services WAN Accelerator Deployment Guide.
Control Description
Change Password New Password. Specify the new administrator password. The password must have a
minimum of 6 characters.
Confirm New Password. Retype the new administrator password.
Change Password. Click Change Password to apply your changes.