HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Management Console user guide (AG421-96002, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 135
2 CONFIGURING THE HP EFS
WAN A
CCELERATOR
NOTE: If you add a new server to your network and you do not specify these fields at that time,
the global settings are applied automatically.
5. Click Save to save your settings permanently or click Reset to return the settings
to their previous values.
Modifying Web
Settings
You can modify Management Console Web user interface settings in the
Authentication: Web Settings page.
Add New TACACS+ Server Server IP. Specify the server IP address.
Authentication Port. Specify the port for the server.
Authentication Type. Select ASCII or PAP from the drop-down list.
Server Key. Specify the server key.
Timeout. Specify the time-out period.
Retries. Specify the number of times you want to allow the user to retry authentication.
Valid values are 0-5.
Enabled. Select True to enable; select False to disable.
Add Server. Click Add Server to add the
TACACS+ server to the list.
Enable/Disable Enable or disable a TACACS+ server.
Remove Selected Servers Remove Selected Servers. To remove an entry, click the check box next to the entry
and click Remove Selected Servers.
Control Description