HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Management Console user guide (AG421-96002, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 143
2 CONFIGURING THE HP EFS
WAN A
CCELERATOR
To upgrade or revert
software versions
1. Click the Setup tab to display the Setup menu.
2. Click Upgrade Software to display the Software Upgrade page.
Figure 2-66. Software Upgrade Page
3. Use the controls to complete the configuration, as described in the following table.
IMPORTANT: You must restart the HP EFS WAN Accelerator service for this configuration
to take effect. For detailed information, see “Starting and Stopping Services” on page 144.
Control Description
Install Upgrade From URL. Specify this option and type the URL.
If you specify a URL in the URL text box, the image is uploaded, installed, and the HP
EFS WAN Accelerator is rebooted at the time you specify.
Local File. Specify this option and type the path or click Browse to navigate to the local
file directory.
If you specify a file to upload in the Local File text box, the image is uploaded
immediately, however the image is installed and the HP EFS WAN Accelerator is
rebooted at the time you specify.
Install Upgrade. Click Install Image to install the new version of the software.
Schedule Upgrade for Later. Specify this option to schedule the upgrade process.
Specify the date and time for the upgrade:
• Date. Specify the date to run the operation, following the format YYYY/MM/DD.
• Time. Specify the time to run the operation, following the format HH:MM:SS.
Switch to Backup Version To revert to the previous software version (identified on this page), click Switch to
Backup Version. The process starts immediately.