HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Management Console user guide (AG421-96002, March 2007)

144 CONFIGURING THE HP EFS WAN ACCELERATOR
Starting and Stopping Services
You can start, stop, and restart the HP EFS WAN Accelerator service in the Start/Stop
Services page.
The HP EFS WAN Accelerator service is a daemon that execute in the background,
performing operations when required.
Many of the HP EFS WAN Accelerator service commands are initiated at startup. It is
important to restart the HP EFS WAN Accelerator service when you have made
changes to your configuration.
WARNING: Restarting the HP EFS WAN Accelerator service disrupts existing network
connections that are proxied through the HP EFS WAN Accelerator.
To start, stop, or
restart services
1. Click the Setup tab to display the Setup menu.
2. Click Start/Stop Services to display the Start/Stop Services page.
Figure 2-67. Start/Stop Services Page
3. Under Optimization, to start, stop, or restart the HP EFS WAN Accelerator service,
click the appropriate button.
4. Click Save to save your settings permanently or click Reset to return your settings
to their previous values.
TIP: To remove data from the data store, click Clean the Data Store. (You rarely need to clean
the data store outside of a lab environment.)