HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Management Console user guide (AG421-96002, March 2007)

162 CREATING HP EFS WAN ACCELERATOR REPORTS AND LOGS
3. Use the controls to customize the report, as described in the following table..
Viewing Appliance Reports
The following section describes how to create and view appliance reports. It includes
the following sections:
 “Viewing Data Store Reports,” next
 “Viewing TCP Statistics Report” on page 163
Viewing Data
Store Reports
The Appliance - Data Store report summarizes the current status and state of the data
store synchronization process.
If you have enabled data store synchronization, it summarizes the state of the
replication process. For detailed information, see “Enabling Failover and Data Store
Synchronization” on page 73.
The Appliance - Data Store report contains the following table that summarizes the
current state of the data store in the appliance.
Control Description
Period Select Last Hour, Last Day, Last Week, or Last Month from the drop-down list.
Type Select Optimized, Pass-Through, or Both from the drop-down list. The default value is
Optimized.
Refresh Set a rate to refresh the report display:
• To refresh your report every 15 seconds, click 15 Seconds.
• To refresh your report every 30 seconds, click 30 Seconds.
• To turn off refresh, click Off.
NOTE: The refresh rate does not affect polling. Polling occurs every 5 minutes.
Printer icon To print your report, click the Printer icon in the upper right corner of the page.
Field Description
Synchronization Connection
Status
Specifies the current connection status of the data store.
Synchronization Catch-Up
Status
Specifies the process of transferring the newest data in from
the active HP EFS WAN Accelerator to the passive HP EFS
WAN Accelerators. The process is complete when the Catch
Up and Keep Up processes meet.
Synchronization Keep-Up
Status
Specifies the process of over-writing the oldest part of the
data store and proceeding to the newest part of the data store.
The process is complete when the Catch Up and Keep Up
processes meet.
Data Store Percentage Used
(Since Last Clean)
Specifies the percentage of the data store that is available for
optimization since the last data store clean request.