HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Management Console user guide (AG421-96002, March 2007)

190 CREATING HP EFS WAN ACCELERATOR REPORTS AND LOGS
3. Use the controls to customize the report, as described in the following table..
Creating
Memory Paging
Reports
The Health - Memory Paging report provides the total number of memory pages, per
second, utilized in the time period specified.
The Health - Memory Paging report includes the following table of statistics that
describe memory paging activity for the time period you specify.
What this Report
Tells You
The Health - Memory Paging report answers the following questions:
 How much memory is being used?
 What is the average and peak amount of memory pages swapped?
About Report
Graphs
In bar-graph and line-graph reports, the x-axis (or tick mark) plots time, according to
the interval you select. The y-axis plots the metric of interest, such as gigabytes (GB)
of bandwidth, percent (%) of data reduction, connection counts, and the like.
A diamond icon above the top margin of the graph points to the value on the x-axis (the
time) at which the peak occurred.
A diamond icon outside the right margin of the graph points to the value on the y-axis
(for example, the percent) that is the average value for the time period selected.
Control Description
Period Select Last Hour, Last Day, Last Week, or Last Month from the drop-down list.
Refresh Set a rate to refresh the report display:
• To refresh your report every 15 seconds, click 15 Seconds.
• To refresh your report every 30 seconds, click 30 Seconds.
• To turn off refresh, click Off.
NOTE: The refresh rate does not affect polling. Polling occurs every 5 minutes.
Printer icon To print your report, click the Printer icon in the upper right corner of the page.
Field Description
Total Pages Swapped Out Specifies the total number of pages swapped. If 100 pages
are swapped approximately every two hours the HP EFS
WAN Accelerator is functioning properly. If thousands of
pages are swapped every few minutes, contact HP technical
support.
Average Pages Swapped Out Specifies the average number of pages swapped. If 100
pages are swapped every couple of hours the HP EFS WAN
Accelerator is functioning properly. If thousands of pages
are swapped every few minutes, contact
HP technical support.
Peak Pages Swapped Out Specifies the peak number of pages swapped.
Peak Pages Swapped Out
Occured At
Specifies the time and date that the peak number of pages
were swapped.