HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Management Console user guide (AG421-96002, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 21
2 CONFIGURING THE HP EFS
WAN A
CCELERATOR
CHAPTER 2 Configuring the HP EFS WAN
Accelerator
In This Chapter This chapter describes how to configure and manage the HP EFS WAN Accelerator
using the Management Console. This chapter includes the following sections:
 “Setting Optimization Services,” next
 “Setting Host Parameters” on page 52
 “Setting Advanced Network Parameters” on page 65
 “Enabling Proxy File Service” on page 99
 “Creating Port Labels” on page 113
 “Setting Report Parameters” on page 115
 “Setting Logging Options” on page 123
 “Setting the Date and Time” on page 125
 “Setting Authentication Methods” on page 127
 “Managing Licenses” on page 137
 “Viewing Scheduled Jobs” on page 138
 “Managing Configurations” on page 139
 “Upgrading Your Software” on page 142
 “Starting and Stopping Services” on page 144
 “Rebooting the HP EFS WAN Accelerator” on page 145
 “Shutting Down the HP EFS WAN Accelerator” on page 145
This chapter assumes that you have installed and configured the HP EFS WAN
Accelerator. For detailed information, see the HP StorageWorks Enterprise File
Services WAN Accelerator Installation and Configuration Guide.
If you prefer, you can use the HP EFS WAN Accelerator Command Line Interface
(CLI) to configure your system. For detailed information, see the HP StorageWorks
Enterprise File Services WAN Accelerator Command Line-Interface Reference
Manual.