HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Management Console user guide (AG421-96002, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 63
2 CONFIGURING THE HP EFS
WAN A
CCELERATOR
Modifying the
Host Name
You can change the host name for the HP EFS WAN Accelerator in the Host Settings
- Host Name page.
NOTE: You were prompted to specify a host name when you completed the installation wizard.
This section describes how you can modify these settings.
To modify the host
name
1. Click the Setup tab to display the Setup menu.
2. Click Host Settings to expand the Host Settings menu.
3. Click Host Name to display the Host Settings - Host Name page.
Figure 2-21. Host Settings - Host Name Page
4. Modify the text in the Host Name text box to change the host name.
5. Click Apply to apply your settings to the running configuration. (Apply your
settings to test a new configuration before saving them permanently.)
6. Click Save to save your settings permanently or click Reset to return the settings
to their previous values.
Mapping Hosts
to IP Addresses
You can map a host name to IP addresses in the Host Settings - Hosts page.
Specify these values only if you are not using DNS to resolve host names and IP
addresses in your system (or if the host does not have a DNS entry).