HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Management Console user guide (AG421-96002, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR MANAGEMENT CONSOLE USER GUIDE 65
2 CONFIGURING THE HP EFS
WAN A
CCELERATOR
Setting proxies is optional.
To enable a proxy 1. Click the Setup tab to display the Setup menu.
2. Click Host Settings to expand the Host Settings menu.
3. Click Proxies to display the Host Settings - Proxies page.
Figure 2-23. Host Settings - Proxies Page
4. Use the controls to complete the configuration, as described in the following table.
5. Click Apply to apply your settings to the running configuration.
6. Click Save to save your settings permanently or click Reset to return the settings
to their previous values.
Setting Advanced Network Parameters
This section describes how to configure advanced network parameters in the HP EFS
WAN Accelerator. It includes the following sections:
 “Enabling Asymmetric Routing Auto-Detection,” next
Control Description
Web/FTP Proxy IP Address Specify the IP address for the Web/FTP proxy.
Port Specify the port number for the Web/FTP proxy.