HP StorageWorks Enterprise File Services WAN Accelerator Manager 2.1.2 User's Guide (392360-004, June 2006)

HP EFS WAN ACCELERATOR MANAGER USER’S GUIDE 103
4 - MANAGING REMOTE HP
EFS WAN A
CCELERATORS
You can upgrade groups of appliances from a Uniform Resource Locator (URL) or
from a local file via File Transfer Protocol (FTP).
You can also revert to a previous version of the software.
NOTE: When you upgrade the HP EFS WAN Accelerator software, the appliance appears in
reports with the status critical. The status appears OK once the upgrade process has completed.
To upgrade software 1. Click the Setup Appliances tab to expand the Setup Appliances menu.
2. Click Upgrade Software in the left menu to display the Upgrade Software page.
Figure 4-6. Setup Appliances: Upgrade Software Page
3. Use the controls to select a software image and remote appliances for upgrade, as
described in the following table.
Control Description
Choose New Image URL Type the URL for the software upgrade image in the textbox. You can specify HTTP or
FTP protocols.
Select Target In the left drop-down list box, select Group or Appliance.
In the right drop-down list box, select the group name or appliance name.
Setup Execution Schedule for later? Click this box if you do not want to run the operation immediately.
Date. Type the date to run the operation, following the format YYYY/MM/DD.
Time. Type the time to run the operation, following the format HH:MM:SS.
Execute/Schedule The Execute/Schedule button toggles between Execute and Schedule, depending on
whether you have chosen to schedule the operation.
If you have chosen to run the job immediately, the Execute button appears; click
Execute to start the job.
If you have chosen to schedule the a job to run at the specified time, the Schedule button
appears; click Schedule to schedule the job.