HP StorageWorks Enterprise File Services WAN Accelerator Manager 2.1.2 User's Guide (392360-004, June 2006)

HP EFS WAN ACCELERATOR MANAGER USER’S GUIDE 113
5 - MANAGING HP EFS WAN
A
CCELERATOR MANAGER
To map host names to
IP addresses
1. Click the Setup Manager tab to expand the Setup Manager menu.
2. Click Hosts to display the Networking - Hosts page.
Figure 5-5. Setup Manager: Networking - Hosts Page
3. Use the controls to complete the configuration, as described in the following table.
4. To save the settings permanently, click Save.
To revert to the running configuration, click Reset.
Control Description
Add New Host Host IP. Type the IP address for the host.
Hostname. Type a host name.
Add Entry. To add an entry to the IP-Host Name table, click Add Entry.
Remove Selected Hosts. To remove the host, click the check box next to the entry and
click Remove Selected Hosts.