HP StorageWorks Enterprise File Services WAN Accelerator Manager 2.1.2 User's Guide (392360-004, June 2006)

HP EFS WAN ACCELERATOR MANAGER USER’S GUIDE 117
5 - MANAGING HP EFS WAN
A
CCELERATOR MANAGER
5. Click Apply to apply the setting to the running configuration.
When you apply page settings, the values are applied to the running configuration
but not saved permanently. The Save Configuration icon displays a flashing
orange arrow to remind you to save your configuration.
6. To save the settings permanently, click Save.
To revert to the running configuration, click Reset.
Setting SNMP
Parameters
You set SNMP parameters in the Reports - SNMP Settings page.
By default SNMP parameters are not configured. Set SNMP parameters for the SNMP
contact and location in the SNMP Settings page.
To set SNMP
parameters
1. Click the Setup Manager tab to expand the Setup Manager menu.
2. Click Reports in the left menu to expand the Reports menu.
3. Click SNMP to display the Reports - SNMP Settings page.
Figure 5-8. Setup Manager: Reports - SNMP Settings Page
4. Use the controls to configure SNMP system parameters, as described in the
following table.
5. Click Apply to apply the setting to the running configuration.
When you apply page settings, the values are applied to the running configuration
but not saved permanently. The Save Configuration icon displays a flashing
orange arrow to remind you to save your configuration.
6. To save the settings permanently, click Save.
To revert to the running configuration, click Reset.
Control Description
System Contact Type the administrator name for the SNMP contact.
System Location Type a description of the physical location of the HP EFS WAN Accelerator Manager.
Read Only Community Name Type a string to identify the read-only community. For example: public.