HP StorageWorks Enterprise File Services WAN Accelerator Manager 2.1.2 User's Guide (392360-004, June 2006)

HP EFS WAN ACCELERATOR MANAGER USER’S GUIDE 125
5 - MANAGING HP EFS WAN
A
CCELERATOR MANAGER
This section includes the following topics:
 “Setting HP EFS WAN Accelerator Manager Authentication Methods,” next
 “Setting Up RADIUS Server Authentication” on page 126
 “Setting the Monitor User Password” on page 131
 “Setting Up RADIUS Server Authentication” on page 126
 “Setting Up TACACS+ Server Authentication” on page 128
Setting HP EFS
WAN
Accelerator
Manager
Authentication
Methods
You prioritize authentication methods you choose to support in the Authentication -
General Settings page.
You can specify local, RADIUS, and TACACS+ authentication methods.
IMPORTANT: Make sure to put the authentication methods in the order in which you want
authentication to occur. If authorization fails on the first method, the next method is attempted,
and so forth, until all the methods have been attempted.
TIP: To set TACACS+ authorization levels (admin or read-only) to allow certain members of
a group to log on, add the following attribute to users on the TACACS+ server:
service = rbt-exec {
local-user-name = "monitor"
}
where you replace monitor with admin for write access.
For detailed information about setting up RADIUS and TACACS+ servers, see the HP
StorageWorks Enterprise File Services WAN Accelerator Deployment Guide.
To prioritize
authentication
methods
1. Click the Setup Manager tab to expand the Setup Manager menu.
2. Click Authentication in the left menu to display the Authentication - General
Settings page.
Figure 5-15. Setup Manager: Authentication - General Settings Page