HP StorageWorks Enterprise File Services WAN Accelerator Manager 2.1.2 User's Guide (392360-004, June 2006)

HP EFS WAN ACCELERATOR MANAGER USER’S GUIDE 127
5 - MANAGING HP EFS WAN
A
CCELERATOR MANAGER
To set up RADIUS
server authentication
1. Click the Setup Manager tab to expand the Setup Manager menu.
2. Click Authentication in the left menu to expand the Authentication menu.
3. Click RADIUS Servers to display the Authentication - RADIUS Servers page.
Figure 5-16. Setup Manager: Authentication - RADIUS Servers Page
4. Use the Add New RADIUS Server controls to complete the configuration for a
new server, as described in the following table.
Control Description
Add New RADIUS Server Server IP. Type the server IP address in the text box.
Authentication Port. Type the port for the server in the text box.
Server Key. Type the server key in the text box.
Timeout. Type the time-out period in the text box.
Retries. Type the number of times you want to allow the user to retry authentication in
the text box. Valid values are 0-5.
Enabled. Select True to enable; select False to disable.
Add Server. Click Add Server to add the RADIUS server to the list.
Enable To enable a RADIUS server that has been added to the list, click the check box and click
Enable.
Disable To disable a RADIUS server that has been added to the list, click the check box and click
Disable.
Remove Selected Servers To remove an RADIUS server from the list, click the check box next to the entry and
click Remove Selected Servers.