HP StorageWorks Enterprise File Services WAN Accelerator Manager 2.1.2 User's Guide (392360-004, June 2006)

HP EFS WAN ACCELERATOR MANAGER USER’S GUIDE 129
5 - MANAGING HP EFS WAN
A
CCELERATOR MANAGER
To set up TACACS+
server authentication
1. Click the Setup Manager tab to expand the Setup Manager menu.
2. Click Authentication in the left menu to expand the Authentication menu.
3. Click TACACS+ Servers to display the Authentication: TACACS+ Servers page.
Figure 5-17. Setup Manager: Authentication: TACACS+ Servers Page
4. Use the Add New TACACS+ Server controls to complete the configuration for a
new server, as described in the following table.
Control Description
Add New TACACS+ Server Server IP. Type the server IP address in the text box.
Authentication Port. Type the port for the server in the text box.
Authentication Type. Select ASCII or PAP from the drop-down list.
Server Key. Type the server key in the text box.
Timeout. Type the time-out period in the text box.
Retries. Type the number of times you want to allow the user to retry authentication in
the text box. Valid values are 0-5.
Enabled. Select True to enable; select False to disable.
Add Server. Click Add Server to add the
TACACS+ server to the list.
Enable To enable a TACACS+ server that has been added to the list, click the check box and
click Enable.
Disable To disable a
TACACS+ server that has been added to the list, click the check box and
click Disable.
Remove Selected Servers To remove an TACACS+ server from the list, click the check box next to the entry and
click Remove Selected Servers.