HP StorageWorks Enterprise File Services WAN Accelerator Manager 2.1.2 User's Guide (392360-004, June 2006)

164 A - HP EFS WAN ACCELERATOR MANAGER COMMAND-LINE INTERFACE
tilden (config) # logging files enable
% Unrecognized command "enable".
Type "logging files ?" for help.
If a command is incomplete, the following message is displayed:
tilden (config) # logging
% Incomplete command.
Type "logging ?" for help.
Command
Negation
You can type the no command before many of the commands to negate the syntax.
Depending on the command or the parameters, command negation disables the
command or returns the parameter to the default value.
Saving
Configuration
Changes
The show configuration command displays the running configuration of the system.
When you make a configuration change to the system, the change becomes part of the
running configuration.
The change does not automatically become part of the configuration file in memory
until you write the file to memory. If you do not save your changes to memory, they
are lost when the system restarts.
To save all configuration changes to memory, you must enter the write memory
command in configuration mode.
CLI Option Commands
This section describe the CLI commands for the HP EFS WAN Accelerator Manager.
It contains the following commands:
 “cli clear-history,” next
 “cli default paging enable” on page 165
 “cli session” on page 165
 “show cli” on page 165
 “show terminal” on page 166
cli clear-history
Description Clears the command history for the current user.
Syntax cli clear-history
Parameters None
Example
minna (config) # cli clear-history
minna (config) #