HP StorageWorks Enterprise File Services WAN Accelerator Manager 2.1.2 User's Guide (392360-004, June 2006)

170 A - HP EFS WAN ACCELERATOR MANAGER COMMAND-LINE INTERFACE

Example minna (config) # ssh server listen interface 10.1.1.1, 10.0.0.4

minna (config) #

User Accounts Commands

This section describes user account commands for the HP EFS WAN Accelerator

Manager. It contains the following commands:

 “username nopassword” on page 170

 “username password” on page 170

 “username password 0” on page 171

 “username password 7” on page 171

 “NTP, Clock, and Time Zone Commands” on page 171

There are two accounts: one with full privileges (admin), and one with privileges for

reading all data and performing all actions, but not for changing any configuration

(monitor).

username nopassword

Description Disables password protection for a user. The no command option re-enables the

specified user account.

Syntax username <userid> nopassword

Parameters

Example

minna (config) # username monitor nopassword

minna (config) #

username password

Description Sets the password for the specified user. The password must be a minimum of 6

characters. The password is returned in cleartext format on the command line.

Syntax username <userid> password <cleartext>

Parameters

<userid> Specifies the user login: admin or monitor.

<cleartext> Specifies the password. The password must be a minimum of 6

characters.