HP StorageWorks Enterprise File Services WAN Accelerator Manager 2.1.2 User's Guide (392360-004, June 2006)

192 A - HP EFS WAN ACCELERATOR MANAGER COMMAND-LINE INTERFACE
Syntax snmp-server {host <hostname or IP address> traps <communitystring> traps
version <versionnumber> <communityname>}
Example
minna (config) # snmp-server host minna version 2c ReaDonLy
minna (config) #
snmp-server location
Description Sets the SNMP server location. The no command option disables the SNMP server
location.
Syntax snmp-server location <addr>
Parameters
Example
minna (config) # snmp-server location “San Francisco”
minna (config) #
Radius and TACACS+ Commands
This section describes the Remote Authentication Dial-In User Service (RADIUS) and
Terminal Access Controller Access Control System (TACACS+) commands. It
contains the following commands:
 “aaa authentication login default,” next
 “aaa authorization map default-user” on page 193
 “aaa authorization map order” on page 193
 “radius-server host” on page 194
 “radius-server key” on page 195
 “radius-server retransmit” on page 196
 “radius-server timeout” on page 196
 “show radius” on page 196
 “show tacacs” on page 196
 “tacacs-server host” on page 197
host <hostname or IP
address>
Specifies the host name or IP address for the SNMP server.
traps
<communitystring>
Sets the SNMP trap on a community.
traps version
<versionnumber>
<communityname>
Specifies the SNMP trap version number and community name.
<addr> Specifies the location of the system.