HP StorageWorks Enterprise File Services WAN Accelerator Manager 2.1.2 User's Guide (392360-004, June 2006)

HP EFS WAN ACCELERATOR MANAGER USER’S GUIDE 195
A - HP EFS WAN
A
CCELERATOR MANAGER
Parameters
Usage The same IP address can be used in more than one radius-server host command if
the auth-port value is different for each. The auth-port value is a User Datagram
Protocol (UDP) port number. The auth-port value must be specified immediately
after the hostname option (if present).
If no radius-server host {hostname | ip-address} is specified, all radius
configurations for the host are deleted. The no radius-server host {hostname | ip-
address} auth-port {port} command can be specified to refine which host is deleted,
as the previous command deletes all RADIUS servers with the specified IP address.
RADIUS servers are tried in the order they are configured.
Example
minna (config) # radius-server host 10.0.0.0 key XXXX retransmit 3
timeout 10
minna (config) #
radius-server key
Description Sets the shared secret text string used to communicate with a RADIUS server. This
command can be overridden using the radius-server host command. The no
command option resets the key to the default value.
Syntax radius-server key <string>
Parameters
Example
minna (config) # radius-server key XYZ
minna (config) #
host <hostname> | ip-
address <IP address>
Specifies the RADIUS server host name or IP address.
auth-port <port-
number>
Specifies the authorization port number. The default value is 1812.
timeout <seconds> Sets the timeout for retransmitting a request to any RADIUS server.
The range is 1-60. The default value is 3.
retransmit <retries> Specifies the number of times the client attempts to authenticate
with any RADIUS server. The default value is 1. The range is 0-5.
To disable retransmissions set it to 0.
key <string> Sets the shared secret text string used to communicate with any
RADIUS server.
<string> Sets the shared secret text string used to communicate with any
RADIUS server.