HP StorageWorks Enterprise File Services WAN Accelerator Manager 2.1.2 User's Guide (392360-004, June 2006)

HP EFS WAN ACCELERATOR MANAGER USER’S GUIDE 201
A - HP EFS WAN
A
CCELERATOR MANAGER
configuration jump-start
Description Reruns the configuration wizard.
Syntax configuration jump-start
Parameters None
Example
minna (config) # configuration jump-start
configuration wizard.
Step 1: Hostname? [telegraph]
Step 2: Use DHCP? [no]
Step 3: Primary IP address? [10.0.0.73]
Step 4: Netmask? [255.255.0.0]
Step 5: Default gateway? [10.0.0.1]
Step 6: Primary DNS server? [10.0.0.2]
Step 7: Domain name? [example.com]
Step 8: Admin password?
Step 9: Copy config from another site? [no]
Step 10: Set the primary interface speed? [auto]
Step 11: Set the primary interface duplex? [auto]
You have entered the following information:
1. Hostname: telegraph
2. Use DHCP: no
3. Primary IP address: 10.0.0.73
4. Netmask: 255.255.0.0
5. Default gateway: 10.0.0.1
6. Primary DNS server: 10.0.0.2
7. Domain name: example.com
8. Admin password: (unchanged)
9. Copy config from another site: no
10. Set the primary interface speed: auto
11. Set the primary interface duplex: auto
To change an answer, enter the step number to return to.
Otherwise hit <enter> to save changes and exit.
Choice:
configuration merge
Description Merge the common settings from a given configuration file.
The following configuration settings are not merged when you run the configuration
merge command: SNMP SysContact and SysLocation, log settings, and all network
settings (for example, host name, auxiliary interface, DNS settings, defined hosts, and
static routing).
The following configuration settings are merged when you run the configuration
merge command: protocols, statistics, CLI, email, NTP and time, Web, SNMP, and
alarm.
Syntax configuration merge <new-config-name>
Parameters
<new-config-name> Specifies the new configuration name.