HP StorageWorks Enterprise File Services WAN Accelerator Manager 2.1.2 User's Guide (392360-004, June 2006)

HP EFS WAN ACCELERATOR MANAGER USER’S GUIDE 213
A - HP EFS WAN
A
CCELERATOR MANAGER
Parameters
Example
minna # ping minna
PING minna.example.com (10.0.0.3) 56(84) bytes of data.
64 bytes from minna.example.com (10.0.0.3): icmp_seq=1 ttl=64
time=0.038 ms
64 bytes from minna.example.com (10.0.0.3): icmp_seq=2 ttl=64
time=0.024 ms
reload
Description Reboots the HP EFS WAN Accelerator Manager. If the clean option is specified, the
data store is cleared before reboot occurs.
Syntax reload [clean [halt] | halt | force]
Parameters
Example
minna # reload
The session will close. It takes about 2-3 minutes to reboot the
appliance.
slogin
Description Enables login to another system using ssh. To view options, enter slogin at the system
prompt.
Syntax slogin [<options>]
[<options>} The following options are supported:
[-L RUbdfnqrvVaA]
[-c count]
[-i interval]
[-w deadline]
[-p pattern]
[-s packetsize].
[-t ttl]
[-I interface or address] For example: ping -I <appliance-IP-address>
<primary-default-gateway>
[-M mtu discovery hint]
[-S sndbuf]
[-T timestamp option]
[-Q tos]
[hop1...]destination
clean [halt] Clears the data store and reboots or shuts down the system. The
reload clean halt command clears the data store and shuts down the
system.
halt Shuts down the system.
force Clears the data store, then reboots or shuts down the system.