HP StorageWorks Enterprise File Services WAN Accelerator Manager 2.1.2 User's Guide (392360-004, June 2006)

80 3 - SETTING UP REMOTE HP EFS WAN ACCELERATORS
You specify the in-path interface if you plan to have the appliance in the direct path
(the same subnet) as the client and the server in your network. You also set the in-path
gateway (WAN router).
NOTE: If you completed the installation wizard when you initially set up the remote appliance,
you already set this parameter. If you chose to complete the appliance configuration through the
HP EFS WAN Accelerator Manager when you initially set up the remote appliance, you must
complete the interface settings as described below to complete the remote appliance
configuration.
To set the in-path
interface
1. Click the Setup Appliances tab to expand the Setup Appliances menu.
2. Click Appliance Specific in the left menu to expand the Appliance Specific
configuration menu.
3. Click Routing: In-Path in the left menu to display the In-Path (LAN/WAN)
Interface page.
Figure 3-26. Setup Appliances: In-Path (LAN/WAN) Interface Page