HP StorageWorks Enterprise File Services WAN Accelerator Manager 2.1.2 User's Guide (392360-004, June 2006)

HP EFS WAN ACCELERATOR MANAGER USER’S GUIDE 87
3 - SETTING UP REMOTE HP
EFS WAN A
CCELERATORS
Setting the DNS You set up Domain Name Service (DNS) for the remote HP EFS WAN Accelerator in
the DNS Settings page.
NOTE: HP recommends you use DNS.
NOTE: If you completed the installation wizard when you initially set up the remote appliance,
you already set this parameter. If you chose to complete the appliance configuration through the
HP EFS WAN Accelerator Manager when you initially set up the remote appliance, you can set
this parameter as described below to complete the remote appliance configuration.
To set the DNS server 1. Click the Setup Appliances tab to expand the Setup Appliances menu.
2. Click Appliance Specific in the left menu to expand the Appliance Specific
configuration menu
3. Click DNS Settings in the left menu to display the DNS Settings page.
Figure 3-30. Setup Appliances: DNS Settings Page