HP StorageWorks Enterprise File Services WAN Accelerator Manager 2.1.2 User's Guide (392360-004, June 2006)

HP EFS WAN ACCELERATOR MANAGER USER’S GUIDE 89
3 - SETTING UP REMOTE HP
EFS WAN A
CCELERATORS
To set IP address-host
name pairs
1. Click the Setup Appliances tab to expand the Setup Appliances menu.
2. Click Appliance Specific in the left menu to expand the Appliance Specific
configuration menu.
3. Click Hosts in the left menu to display the Hosts page.
Figure 3-31. Setup Appliances: Hosts Page
4. Use the controls to complete the configuration, as described in the following table.
5. To save the settings permanently, click Save.
To revert to the running configuration, click Reset.
Setting
Authentication and
Encryption
You configure authentication and encryption between peer HP EFS WAN Accelerators
in the Authentication & Encryption page.
Authentication and encryption are implemented with the IP Security Protocol (IPsec).
Control Description
Settings will be applied to
appliance
Select the appliance for which you want to view or modify the configuration from the
drop-down list.
Add New Host Hostname. Type a host name.
Host IP. Type the IP address for the host.
Add Entry. To add an entry to the IP-Hostname table, click Add Entry.
Remove Selected Hosts. To remove an entry, click the check box next to the name and
click Remove Selected Hosts.