HP StorageWorks Data Replication Manager HSG80 ACS Version 8.7P Configuration Guide (AA-RPHZF-TE, March 2004)

Configuring a Standard Data Replication Manager Solution
106 Data Replication Manager HSG80 ACS Version 8.7P Configuration Guide
Example Display 30
.
.
.
Host PORT_1:
Reported PORT_ID = nnnn-nnnn-nnnn-nnnn
. . . . . . . . . . . . . . . . . . PORT_1_TOPOLOGY = FABRIC (up)
Host PORT_2:
Reported PORT_ID = nnnn-nnnn-nnnn-nnnn
. . . . . . . . . . . . . . . . . . .PORT_2_TOPOLOGY = FABRIC (up)
NOREMOTE_COPY
I 23. You are now ready to enable DRM. Issue the following CLI command:
SET THIS_CONTROLLER REMOTE_COPY=InitiatorControllerName
Example: set this_controller remote_copy=BuildngA
Note: Be sure to specify a meaningful InitiatorControllerName, such as a name that reflects the
initiator node’s location. Do not use “local” or “remote”; they are reserved keywords. The name
can be up to eight characters and must be unique to all of your controllers.
After entering this CLI command, you should see a series of %LFL and %EVL displays; the
controllers automatically restart.
I 24. Verify that these settings are in place:
SHOW THIS_CONTROLLER
You should see a display similar to that in Example Display 31.
Example Display 31
.
.
.
Host PORT_2:
Reported PORT_ID = nnnn-nnnn-nnnn-nnnn
PORT_2_TOPOLOGY = FABRIC (offline)
REMOTE_COPY = BUILDNGA
.
.
.