HP StorageWorks Data Replication Manager HSG80 ACS Version 8.7P Configuration Guide (AA-RPHZF-TE, March 2004)

Configuring a Standard Data Replication Manager Solution
110 Data Replication Manager HSG80 ACS Version 8.7P Configuration Guide
Example:
a. Insert short-wave GBICs in ports 2 and 4 of the top and bottom Fibre Channel
switches.
b. Connect a 50-micron, multimode fiber optic cable from port 1 of the top controller to
port 2 of the top Fibre Channel switch (as shown by callout 1 of Figure 20).
c. Connect a second 50-micron, multimode fiber optic cable from port 2 of the top
controller to port 4 of the top Fibre Channel switch (as shown by callout 2 of
Figure 20).
d. Connect a third 50-micron, multimode fiber optic cable from port 1 of the bottom
controller to port 2 of the bottom Fibre Channel switch (as shown by callout 3 of
Figure 20).
e. Connect a fourth 50-micron, multimode fiber optic cable from port 2 of the bottom
controller to port 4 of the bottom Fibre Channel switch (as shown by callout 4 of
Figure 20).
Figure 20 illustrates this example. In this figure, the controllers are on the left and the switches
are on the right.
1
Cable from port 1 of the top controller to port 2 of the top Fibre Channel switch
2 Cable from port 2 of the top controller to port 4 of the top Fibre Channel switch
3 Cable from port 1 of the bottom controller to port 2 of the bottom Fibre Channel switch
4 Cable from port 2 of the bottom controller to port 4 of the bottom Fibre Channel switch
Figure 20: Cabling between the controllers and the Fibre Channel switches
CXO7089A
1
2
3
4