HP StorageWorks Data Replication Manager HSG80 ACS Version 8.7P Configuration Guide (AA-RPHZF-TE, March 2004)

Configuring a Standard Data Replication Manager Solution

130 Data Replication Manager HSG80 ACS Version 8.7P Configuration Guide

I 8. Uninstall the Fibre Channel driver with the following command:

#installp -u PC1000.driver.obj

I 9. Disconnect all Fibre Channel adapter cables.

I 10. If adding an additional Cambex Fibre Channel adapter, shut down the server with the

following command:

#shutdown

I 11. Install additional Fibre Channel HBAs (if required). Do not connect fiber cables at this

time.

Note: The maximum number of HBAs per host is 6. Refer to IBM's PCI Adapter Placement

Reference document.

I 12. Power up or boot server.

I 13. Load HP StorageWorks platform kit for AIX v8.7:

a. Load platform CD into CD drive.

b. Enter the following commands:

#mkdir /cdrom

#mount -v cdrfs -r /dev/cd0 /cdrom

#cd /cdrom

#./INSTALL

(follow the prompts)

The system will not find any DEC HSG80 RAID array devices at this time.

The option of installing the SWCC Agent will be presented at this time. Choose Yes.

Installation of the SWCC Agent will begin. When installation is complete, you will be

asked if you wish to start the Agent:

■ Answer Yes if the host will be used as an SWCC Agent.

■ Answer No if the host will not be used as an SWCC Agent.

Refer to the HP StorageWorks HSG80 ACS Solution Software Version 8.7 for IBM AIX

Installation and Configuration Guide for additional information on this process.

#umount /cdrom

I 14. Remove platform kit Fibre Channel driver with the following commands:

#installp -u PC1000.driver.obj

#lslpp -l PC1000.driver.obj

I 15. Load Secure Path for IBM Fibre Channel driver:

a. Load the Secure Path CD in to the CD drive.