HP StorageWorks Data Replication Manager HSG80 ACS Version 8.7P Configuration Guide (AA-RPHZF-TE, March 2004)

Configuring a Standard Data Replication Manager Solution

138 Data Replication Manager HSG80 ACS Version 8.7P Configuration Guide

Note: HP recommends that you set both the fully qualified and unqualified DNS names as

valid, authorized clients.

Install Secure Path Manager

I For installation instructions, refer to the current version of the HP StorageWorks Secure Path

for Novell NetWare Installation and Reference Guide.

Install SWCC (Optional)

I You may now install SWCC. For detailed information about SWCC, including installation,

refer to the Compaq StorageWorks Command Console Version 2.4 User Guide.

Connect the Host to the SAN

Use your established cabling policy to connect the host to the Fibre Channel switch.

I 1. Use 50-micron, multimode fiber optic cable to connect one adapter of each pair to the top

Fibre Channel switch.

I 2. Use 50-micron, multimode fiber optic cable to connect the other adapter of each pair to the

bottom Fibre Channel switch.

For example, if there are two adapters in a server, the first adapter must be connected to the

top Fibre Channel switch and the second adapter must be connected to the bottom Fibre

Channel switch.

I 3. Verify that the connection between the host and the switch has been made:

SHOW CONNECTIONS

You should see a display similar to that in Example Display 48.

Example Display 48

Connection Unit

Name Operating system Controller Port Address Status Offset

!NEWCON00 WINNT THIS 1 210013 online 0