HP StorageWorks Data Replication Manager HSG80 ACS Version 8.7P Configuration Guide (AA-RPHZF-TE, March 2004)

Troubleshooting
180 Data Replication Manager HSG80 ACS Version 8.7P Configuration Guide
Zoning
Improper zoning can prevent the proper access to controllers and hosts. Refer to your switch
documentation for information on zoning and to Chapter 6, “Configuring the Optional
Advanced DRM Solutions,” in this guide for information on zoning for a DRM configuration.
Secure Path
If the same unit shows up twice in AIX, Solaris, NetWare, Windows NT, or Windows 2000, or
does not show up at all, then Secure Path is not working properly. Refer to the HP
StorageWorks Secure Path Installation and Reference Guide for your operating system.
Note: Secure Path does not apply to OpenVMS or Tru64 UNIX because they both have built-in
multibus driver support.
Table 17: SHOW REMOTE FULL Command Output
Name Uses Used by
-------------------------------------------------
RCS1 remote copy D1 A1
Reported LUN ID: 6000-1FE1-0009-1D70-0009-9421-3547-0176
Switches:
OPERATION_MODE = SYNCHRONOUS
ERROR_MODE = FAILSAFE
If in failsafe mode, units can
become failsafe locked.
FAILOVER_MODE = MANUAL
OUTSTANDING_IOS = 20
Initiator (BUILDNGA\D1) state:
ONLINE to this controller
Not reserved
Target state:
BUILDNGB\D1 is NORMAL
Verify that the remote copy set
has a target.