HP StorageWorks Data Replication Manager HSG80 ACS Version 8.7P Configuration Guide (AA-RPHZF-TE, March 2004)

Zoning in the Storage Area Network
195Data Replication Manager HSG80 ACS Version 8.7P Configuration Guide
These are the DRM remote copy paths:
As shown earlier, switches A and B are Domain ID 0; switches Y and Z are Domain ID 1.
1. List switch domains A and Y in the Red Zone_Top input form. List switch Domains B and
Z in the Red Zone_Bottom form.
2. List the controller connections.
Figure 33 shows the controller pair listed as: Controller A2_top (top A controller, port 2)
and Controller Y2_top (top Y controller, port 2).
a. List these two connections in the Red Zone_Top input form.
b. List Controller A2_bottom (meaning bottom A controller, port 2) and Controller
Y2_bottom (meaning bottom Y controller, port 2) in the Red Zone_Bottom input
form.
Switch A, port 6 connects to Controller A2_top. Switch Y, port 6 connects to Controller
Y2_top. Switch B, port 6 connects to Controller A2_bottom. Switch Z, port 6 connects to
Controller Y2_bottom.
3. Select the Telnet session from switch A.
4. Create the alias names in the zone. For the connections from switches A and Y to the
controllers A2_top and Y2_top, the commands are:
aliCreate "Controller A2_top", "0,6"
aliCreate "Controller Y2_top", "1,6"
These commands create the alias “Controller A2_top” with Domain ID 0 and switch
port 6; and the alias “Controller Y2_top” with Domain ID 1 and switch port 6.
5. Save the configuration:
cfgSave
6. Select the Telnet session to switch B.
7. For the connections from switches B and Z to the controllers A2_bottom and Y2_bottom,
enter the following commands:
aliCreate "Controller A2_bottom", "0,6"
aliCreate "Controller Y2_bottom", "1,6"
These commands create the alias “Controller A2_bottom” with Domain ID 0 and switch
port 6; and the alias “Controller Y2_bottom” with Domain ID 1 and switch port 6.
8. Save the configuration:
cfgSave