HP StorageWorks Data Replication Manager HSG80 ACS Version 8.7P Configuration Guide (AA-RPHZF-TE, March 2004)

Introduction to Data Replication Manager
31Data Replication Manager HSG80 ACS Version 8.7P Configuration Guide
StorageWorks Command Console (Optional)
SWCC provides local and remote management of controllers and their attached storage
devices. SWCC consists of two major components: the SWCC client and the SWCC agent.
SWCC can be used to configure and manage the DT storage subsystem.
The SWCC client is a companion to the agent; it is a graphical user interface (GUI) that runs
on a local host and displays the logical and physical layout and status of a selected subsystem
in graphical form.
The SWCC agent is a host-resident program that is an interface between the client and the
host's storage subsystem that allows the two to communicate over a network.
For a full description of SWCC and how it operates, refer to the Compaq StorageWorks
Command Console Version 2.4 User Guide.
Restrictions
The HSG80 controller does not distinguish between commands issued from in-band command
tools (SWCC and Command Scripter) and commands issued out-of-band through the serial
port. Serial port commands should only be performed when the customer has restricted
commanding from other sources.