HP StorageWorks Data Replication Manager HSG80 ACS Version 8.7P Configuration Guide (AA-RPHZF-TE, March 2004)

Getting Started
50 Data Replication Manager HSG80 ACS Version 8.7P Configuration Guide
Example Display 1
BuildngBTop> SHOW UNITS
LUN Uses Used by
---------------------------------------------------------
D1 DISK10000
D2 DISK20000
D3 R3
D4 R4
D5 S5
D6 M6
D11 DISK30100
D20 MIR_DLOG
D21 MIR_LOGD
D199 DISK30300
BuildngBTop>
In this example there is no D0 and there is an available LUN (D7) to use (note that D7 is
missing from the list). Had there been a D0, you would need to delete the D0, then add
unit D7. All LUN 0 devices must be changed to an unused LUN.
This step is necessary because the controllers in SCSI-3 mode automatically use LUN 0
for the Command Console LUN.
3. Stop all I/O and unmount all devices to the HSG80 controllers.
4. Verify that the HSG80 controllers are in SCSI-2 mode by issuing the following CLI
command:
SHOW THIS_CONTROLLER
You should see a display similar to that in Example Display 2.
Example Display 2
Controller:
HSG80 ZG84906303 Software ACS 8.7P-0, Hardware E12
NODE_ID = 5000-1FE1-0000-01F0
ALLOCATION_CLASS = 0
SCSI_VERSION = SCSI-2
Configured for MULTIBUS_FAILOVER with ZG84906237
In dual-redundant configuration
Device Port SCSI address 7
Time: 02-APR-2002 14:06:48
Command Console LUN is disabled
Host Connection Table is LOCKED
Smart Error Eject Disabled
.
.
.