HP StorageWorks Data Replication Manager HSG80 ACS Version 8.7P Configuration Guide (AA-RPHZF-TE, March 2004)

Configuring a Standard Data Replication Manager Solution
76 Data Replication Manager HSG80 ACS Version 8.7P Configuration Guide
T 1. We suggest that you use the worksheet in Figure 19 when renaming your hosts.
Figure 19: Host renaming worksheet
T 2. When you have completed the worksheet, rename the connections:
RENAME !NEWCONxx TargetHostConnectionNamex
RENAME !NEWCONxx TargetHostConnectionNamey
Example: rename !NEWCONxx HostB1
Example: rename !NEWCONxx HostB2
T 3. Set the operating system for each connection to OpenVMS:
SET TargetHostConnectionNamex OPERATING_SYSTEM = VMS
Example: set HostB1 operating_system = vms
Example: set HostB2 operating_system = vms
T 4. When you have finished renaming your host connections, issue the following command to
see your settings:
SHOW CONNECTIONS
You should see a display similar to that in Example Display 12.
!NEWCON xx World Wide Name Host Name Host OS Type HBA Number
Note: If you use scripting to automate failover and failback operations, do not use dashes
(hyphens) as separators in your naming convention—use underscores instead. Dashes are not
allowed by the Perl scripting language.