HP StorageWorks Data Replication Manager HSG80 ACS Version 8.7P Configuration Guide (AA-RPHZF-TE, March 2004)

Configuring a Standard Data Replication Manager Solution
84 Data Replication Manager HSG80 ACS Version 8.7P Configuration Guide
b. Enter the following commands:
#mkdir /cdrom
#mount -v cdrfs -r /dev/cd0 /cdrom
#cd /cdrom
#./INSTALL
(follow the prompts)
The system will not find any DEC HSG80 RAID array devices at this time.
The option of installing the SWCC Agent will be presented at this time. Choose Yes.
Installation of the SWCC Agent will begin. When installation is complete, you will be
asked if you wish to start the Agent:
■ Answer Yes if the host will be used as an SWCC Agent.
■ Answer No if the host will not be used as an SWCC Agent.
Refer to the HP StorageWorks HSG80 ACS Solution Software Version 8.7 for IBM
AIX Installation and Configuration Guide for additional information on this process.
#umount /cdrom
T 4. Remove platform kit Fibre Channel driver v1.5.20.2 with the following commands:
#installp -u PC1000.driver.obj
#lslpp -l PC1000.driver.obj
T 5. Load Secure Path for IBM v2.0D, Fibre Channel driver v1.5.23.2:
a. Load the Secure Path CD into CD drive.
b. Enter the following commands:
#mkdir /mnt
#mount -v cdrfs -r /dev/cd0 /mnt
#mkdir /tmp/driver
#cp /mnt/driver/PC1000SP.image /tmp/driver
#cd /tmp/driver
#installp -acd PC1000SP.image all
#lslpp -l PC1000.driver.obj
#umount /mnt
T 6. Run Configuration Manger to add the Fibre Channel HBA to the configuration database.
Enter the following commands:
#cfgmgr -v
#lsdev -Cc adapter
T 7. Connect fiber cables to HBAs.
T 8. Run Configuration Manager to add hdisks / HSG80 Raid Array to the configuration
database. Enter the following commands:
#cfgmgr -v
#lsdev -Cc disk
The system will find HSG80 Raid Array devices at this time. If CCL is enabled on the
HSG80, the server will find a Command Console LUN.