HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 deployment guide (June 2006)

HP STORAGEWORKS ENTERPRISE FILE SERVICES WAN ACCELERATOR 2.1.5 DEPLOYMENT GUIDE 19
2 - IN-PATH DEPLOYMENTS
1. Configure the HP EFS WAN Accelerator as an in-path device. For detailed
information, see the HP StorageWorks Enterprise File Services WAN Accelerator
Installation and Configuration Guide.
2. Connect to the Management Console. For detailed information, see the HP
Enterprise File Services WAN Accelerator Management Console User Guide.
3. Navigate to the Setup: Advanced Networking - Failover Settings page in the
Management Console.
4. Enable failover support. For example:
 On HP EFS WAN Accelerator A: specify HP EFS WAN Accelerator A as the
master and specify the in-path IP address of HP EFS WAN Accelerator B as
the backup (other) IP address.
 On HP EFS WAN Accelerator B: specify HP EFS WAN Accelerator B as the
backup (other) and specify the in-path IP address of HP EFS WAN Accelerator
A as the master IP address.
Figure 2-3. Setup: Advanced Networking - Failover Settings Page
5. Enable Automated Online Datastore Synchronization. For example:
 Select Master or Backup from the Current Appliance is the drop-down list.
 Type a port number in the Synchronization Port text box. The default value is
7744.