HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 deployment guide (June 2006)

32 4 - OUT-OF-PATH NETWORK DEPLOYMENTS
1. Configure the HP EFS WAN Accelerator as an in-path device. For detailed
information, see the HP StorageWorks Enterprise File Services WAN Accelerator
Installation and Configuration Guide.
2. Connect to the Management Console. For detailed information, see the HP
Enterprise File Services WAN Accelerator Management Console User Guide.
3. Navigate to the Setup: Optimization Service - In-Path Rules page in the
Management Console.
Figure 4-3. Setup: Optimization Service - In-Path Rules Page
4. To enable failover support for the out-of-path HP EFS WAN Accelerators, define
a fixed-target rule that points to the main and backup targets. For example:
 Type the out-of-path, server-side HP EFS WAN Accelerator IP address and
port in the Target Appliance IP and Port text boxes.