HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 deployment guide (June 2006)

34 4 - OUT-OF-PATH NETWORK DEPLOYMENTS
1. Configure the HP EFS WAN Accelerators as in-path devices. For detailed
information, see the HP StorageWorks Enterprise File Services WAN Accelerator
Installation and Configuration Guide.
2. Connect to the Management Console. For detailed information, see the HP
Enterprise File Services WAN Accelerator Management Console User Guide.
3. Navigate to the Setup: Optimization Service - In-Path Rules page in the
Management Console.
4. Define fixed-target rules for the set of HP EFS WAN Accelerators in each cluster
of user sites. For example:
 In the Northern region, for all the HP EFS WAN Accelerators in the set, define
HP EFS WAN Accelerator 1 as the fixed target for servers in Subnet S.
 In the Southern region, for all HP EFS WAN Accelerators in the set, define HP
EFS WAN Accelerator 2 as the fixed target for servers in Subnet S.
Figure 4-5. Setup: Optimization Service - In-Path Rules, Fixed Target Page
5. Apply and save the new configuration in the Management Console.
6. Begin optimization. View performance reports and system logs in the
Management Console.