HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 deployment guide (June 2006)

36 4 - OUT-OF-PATH NETWORK DEPLOYMENTS
1. Configure the HP EFS WAN Accelerator as an in-path and out-of-path device. For
detailed information, see the HP StorageWorks Enterprise File Services WAN
Accelerator Installation and Configuration Guide.
2. Connect to the Management Console to verify your configuration. For detailed
information, see the HP Enterprise File Services WAN Accelerator Management
Console User Guide.
3. Navigate to the Setup: Optimization Service - In-Path Rules page in the
Management Console.
Figure 4-7. Setup: Optimization Service - In-Path Rules Page
4. Define in-path, fixed-target rules for traffic you want to optimize. For example:
 Select start, end, or a rule number from the Insert Rule At drop-down list to
insert a rule in the Rules list. When you specify a particular rule number, the
rule is placed after the rule number you specified and before the default auto-
discover rule.
 Type the IP address for the source subnet in the Source Subnet text box. Use
the following format: 0.0.0.0/0.