HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 deployment guide (June 2006)

HP STORAGEWORKS ENTERPRISE FILE SERVICES WAN ACCELERATOR 2.1.5 DEPLOYMENT GUIDE 63
7 - WCCP DEPLOYMENTS
CHAPTER 7 WCCP Deployments
In This Chapter This chapter describes how to configure the Web Cache Communication Protocol
(WCCP) to redirect traffic to an HP EFS WAN Accelerator or group of HP EFS WAN
Accelerators. It contains the following sections:
 “Introduction to WCCP,” next
 “Connecting the HP EFS WAN Accelerator to Your Network in WCCP
Deployments” on page 67
 “A Basic WCCP Configuration” on page 68
 “Configuring WCCP Using the Management Console” on page 70
 “Dual WCCP Deployment” on page 76
 “Additional WCCP Features” on page 79
 “Troubleshooting” on page 82
This chapter assumes you are familiar with the HP EFS WAN Accelerator
Management Console (Management Console). For detailed information about the
Management Console and how to use it, see the HP Enterprise File Services WAN
Accelerator Management Console User Guide.
This chapter also assumes that you are familiar with the installation and configuration
process for the HP EFS WAN Accelerator. For detailed information, see the HP
StorageWorks Enterprise File Services WAN Accelerator Installation and
Configuration Guide.
This chapter provides the basic steps for WCCP network deployments. It does not
provide detailed procedures. Use this chapter as a general guide to these deployments.
If you need additional assistance, contact HP technical support located at http://
www.hp.com.
For detailed information about the factors you must consider before you design and
deploy the HP EFS WAN Accelerator in a network environment, see “Design and
Deployment Overview” on page 11.