HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 deployment guide (June 2006)

HP STORAGEWORKS ENTERPRISE FILE SERVICES WAN ACCELERATOR 2.1.5 DEPLOYMENT GUIDE 71
7 - WCCP DEPLOYMENTS
1. Configure the HP EFS WAN Accelerator in an in-path configuration. For detailed
information, see the HP StorageWorks Enterprise File Services WAN Accelerator
Installation and Configuration Guide.
2. Connect to the Management Console. For detailed information, see the HP
StorageWorks Enterprise File Services WAN Accelerator Installation and
Configuration Guide.
3. Navigate to the Setup: Optimization Service - General Settings page in the
Management Console.
4. To enable external traffic redirection click Enable In-Path Support, Enable L4/
PBR/WCCP Support on Interface wan0_0, and Enable Optimization on
Interface inpath0_0.
Figure 7-3. Setup: Optimization Service - General Settings Page
5. Enable WCCP on your router.