HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 deployment guide (June 2006)

HP STORAGEWORKS ENTERPRISE FILE SERVICES WAN ACCELERATOR 2.1.5 DEPLOYMENT GUIDE 73
7 - WCCP DEPLOYMENTS
7. Define the service group: specify the service group identification number, the
router IP address, password, priority, weight, and encapsulation scheme, and
optionally, global settings.
8. Click Add Group to display your new group in the Service Group list.
9. Under WCCP v2 Global Settings, click Enable WCCP v2 Support.
10. Click Update Settings to enable WCCP v2 support.
11. Double-click the new service group name to display the Setup: Service, WCCP
Groups, Service Group page.
12. Define flags and ports; add additional routers for the service group.
Figure 7-5. Setup: Service, WCCP Groups Page