HP StorageWorks Enterprise File Services WAN Accelerator 2.1.5 deployment guide (June 2006)

HP STORAGEWORKS ENTERPRISE FILE SERVICES WAN ACCELERATOR 2.1.5 DEPLOYMENT GUIDE 75
7 - WCCP DEPLOYMENTS
17. Repeat Step 4 for ports 139, 445, 21, and 80.
18. To pass through all other traffic, define a pass-through rule on the server-side HP
EFS WAN Accelerator.
Figure 7-7. Setup: Optimization Service - In-Path Rules Page
19. Save and apply the new configuration in the Setup: Configuration Manager page.
20. Begin optimization. View performance reports and system logs in the
Management Console.
Basic Steps
(Server-Side)
The server-side HP EFS WAN Accelerator is configured as an out-of-path device. For
detailed information, see the HP StorageWorks Enterprise File Services WAN
Accelerator Installation and Configuration Guide.
IMPORTANT: This is an example of one type of WCCP deployment. You can also have
deployments with both HP EFS WAN Accelerators configured as in-path devices and WCCP
configured on one of them. In this case, you would configure the server-side as an in-path device
and you would not define fixed-target rules on the client-side. For detailed information, contact
HP technical support at http://www.hp.com.