HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 105
4 - CONFIGURATION-MODE
C
OMMANDS
Example minna (config) # in-path asymmetric routing pass-through enable
minna (config) #
in-path cdp enable
Description Enables Cisco Discovery Protocol (CDP) support on Policy Based Routing (PBR)
deployments. Virtual in-path failover deployments require CDP on the HP EFS WAN
Accelerator to bypass the HP EFS WAN Accelerator that is down.
The no command option disables CDP.
CDP is proprietary protocol used by Cisco routers and switches to obtain neighbor IP
addresses, model, IOS version, and so forth. The protocol runs at the Open System
Interconnection (OSI) layer 2 using the 802.3 Ethernet frame.
For detailed information about how to configure an HP EFS WAN Accelerator for PBR
with CDP, see the HP StorageWorks Enterprise File Services WAN Accelerator
deployment guide.
Syntax [no] in-path cdp enable
Parameters None
Example
minna (config) # in-path cdp enable
minna (config) #
in-path cdp holdtime
Description Configures the hold-time for CDP. This refresh period allows for a quick recovery in
failover deployments with PBR and CDP.
The no command option resets the CDP hold-time to the default.
For detailed information about how to configure an HP EFS WAN Accelerator for PBR
with CDP, see the HP StorageWorks Enterprise File Services WAN Accelerator
deployment guide.
Syntax [no] in-path cdp holdtime <holdtime>
Parameters
Example
minna (config) # in-path cdp holdtime 10
minna (config) #
in-path cdp interval
Description Configures the refresh period for CDP. This refresh period allows for a quick
recovery in failover deployments with PBR and CDP.
<holdtime> Specifies the CDP hold-time in seconds. The default value is 5.