HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

106 4 - CONFIGURATION-MODE COMMANDS
The no command option resets the CDP refresh period to the default.
For detailed information about how to configure an HP EFS WAN Accelerator for PBR
with CDP, see the HP StorageWorks Enterprise File Services WAN Accelerator
deployment guide.
Syntax [no] in-path cdp interval <interval>
Parameters
Example
minna (config) # in-path cdp holdtime 10
minna (config) #
in-path enable
Description Enables in-path support. An in-path configuration is a configuration in which the HP
EFS WAN Accelerator is in the direct path of the client and the server.
The no command option disables in-path support.
Syntax [no] in-path enable
Parameters None
Example
minna (config) # in-path enable
minna (config) #
in-path interface enable
Description Enables the in-path interface for optimization. The in-path interface enable
command is useful only when there are multiple bypass cards enabled (for example,
with a Four-Port Copper Gigabit-Ethernet Bypass card).
The no command option disables the in-path interface.
Syntax [no] in-path interface <interface> enable
Parameters
Example
minna (config) #in-path interface 10.0.0.1 enable
minna (config) #
in-path interface vlan tag
Description Enables Virtual Local Area Network (VLAN) support for an in-path HP EFS WAN
Accelerator on a trunked link. The in-path interface vlan tag command enables you
<interval> Specifies the CDP interval in seconds. The default value is 1.
<interface> Specifies the IP address of the in-path interface.