HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

112 4 - CONFIGURATION-MODE COMMANDS
Example minna (config) # in-path peering rule pass peer 10.0.1.2 rulenum 1
minna (config) # in-path peering rule pass peer 10.0.1.3 rulenum 1
minna (config) # in-path rule pass-through src 10.0.1.2/32 rulenum 1
minna (config) # in-path rule pass-through src 10.0.1.3/32 rulenum 1
minna (config) # in-path peering move-rule 3 to 1
minna (config) #
in-path peering move-rule
Description Moves an in-path peering rule in serial cluster deployments.
Syntax in-path peering move-rule <rulenum> to <rulenum>
Parameters
Example
minna (config) # in-path peering move-rule 3 to 1
in-path rule auto-discover
Description Adds an in-path, auto-discovery rule. The HP EFS WAN Accelerator automatically
intercepts and optimizes traffic on all IP addresses (0.0.0.0) and ports (all).
The no command option disables the in-path auto-discover rule. The no command
option has the following syntax: no in-path <rulenum>.
Syntax [no] in-path rule auto-discover {[scraddr <network>] | [dstaddr <network>] |
[dstport <port>]} | [neural-mode <mode>] | [optimization <policy>] |
[vlan <vlan tag ID>] | [rulenum <rulenum>]
Parameters
dest <subnet> Specifies the destination network for this rule.
dest-port <port |
portlabel>
Specifies the destination port for this rule. You can specify all for
all ports or a port label. For detailed information about port
labels, see “port-label” on page 147.
rulenum <rulenum> Specifies the rule number.
<rulenum> Specifies the rule number.
srcaddr <network> Specifies the source network for this rule. For example:
1.2.3.4/32
dstaddr <network> Specifies the destination network for this rule. Use the following
format: XXX.XXX.XXX.XXX/XX
dstport <port> Specifies the destination port for this rule. The destination port can
be a single port (number), a port label, or all specifies all ports.