HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

HP STORAGEWORKS EFS WAN ACCELERATOR COMMAND-LINE INTERFACE REFERENCE MANUAL 133
4 - CONFIGURATION-MODE
C
OMMANDS
logging trap
Description Sets the minimum severity for messages sent to the remote syslog servers. The default
value is none.
The no command option sets the severity level for logging to none.
Syntax [no] logging trap <loglevel>
Parameters
Example
minna (config) # logging trap notice
minna (config) #
ntpdate
Description Conducts a single-time synchronization with a specified NTP server.
Syntax ntpdate <addr>
Parameters
Example
minna (config) # ntpdate 10.10.10.1
minna (config) #
ntp disable
Description Disables NTP support.
The no command option enables NTP support.
Syntax [no] ntp disable
Parameters None
Example
minna (config) # ntp disable
minna (config) #
<loglevel> Specifies the logging severity level. The following levels are supported:
• emerg. Emergency, the system is unusable.
• alert. Action must be taken immediately.
• crit. Critical conditions.
• err. Error conditions.
• warning. Warning conditions.
• notice. Normal but significant condition.
• info. Informational messages.
• debug. Debug-level messages.
<addr> Specifies the NTP server with which to synchronize.