HP StorageWorks Enterprise File Services WAN Accelerator 3.0.4 Command-Line Interface reference manual (AG421-96004, March 2007)

152 4 - CONFIGURATION-MODE COMMANDS
protocol cifs prepop enable
Description Enables CIFS transparent prepopulation.
The no command option disables transparent prepopulation.
Syntax [no] protocol cifs prepop enable
Parameters None
Example
minna (config) # protocol cifs prepop enable
minna (config) #
protocol cifs secure-sig-opt enable
Description Disables SecuritySignature negotiations between a Windows client and the server.
By default, the Secure-CIFS feature is disabled.
For detailed information about disabling Windows security signing, see the HP
StorageWorks Enterprise File Services WAN Accelerator installation and
configuration guide.
When a Windows server is set to SecuritySignatureEnable, the HP EFS WAN
Accelerator stops CIFS transaction prediction optimization but continues performing
SDR optimization. When the HP EFS WAN Accelerator secure-sig-opt command is
set to enable, the HP EFS WAN Accelerator appliance continues to perform CIFS
optimization for connections even when the SecuritySignatureEnable setting is
specified. (The HP EFS WAN Accelerator does not continue to optimize traffic if the
SecuritySignatureRequired setting is specified on the server.)
The no command option enables SecuritySignature negotiations.
Syntax [no] protocol cifs secure-sig-opt enable
Parameters None
Example
minna (config) # protocol cifs secure-sig-opt enable
minna (config) #
protocol connection lan receive buf-size
Description Sets the LAN buffer size for high-speed Transmission Control Protocol (HSTCP)
support.
The no command option resets the buffer size to the default.
You must increase your LAN buffer size to 1 MB. For detailed information about
configuring HSTCP, see “tcp highspeed enable” on page 193.
Syntax [no] protocol connection lan receive buf-size <bytes>